Dr K Sharif

2018

• AL-Mayali, M. F., Hutt, S., Sharif, K. J., Clarke, A. and Evans, H. P. 2018. Experimental and numerical study of micropitting initiation in real rough surfaces in a micro-elastohydrodynamic lubrication regime. Tribology Letters 66(4), article number: 150. (10.1007/s11249-018-1110-2)

2017

• Clarke, A., Jamali, H., Sharif, K., Evans, H., Frazer, R. and Shaw, B. 2017. Effects of profile errors on lubrication performance of helical gears. Tribology International 111, pp. 184-191. (10.1016/j.triboint.2017.02.034)
• Al-Mayali, M. F., Evans, H. P. and Sharif, K. 2017. Assessment of the effects of residual stresses on fatigue life of real rough surfaces in lubricated contact. Presented at: 2016 International Conference for Students on Applied Engineering (ICSAE), Newcastle upon Tyne, UK, 20-21 October 2016International Conference for Students on Applied Engineering (ICSAE). Piscataway, NJ: IEEE pp. 123-128., (10.1109/ICSAE.2016.7810173)

2016

• Clarke, A., Jamali, H., Sharif, K., Evans, H., Frazer, R. and Shaw, B. 2016. Effects of profile errors on lubrication performance of helical gears. Presented at: 43rd Leeds-Lyon Symposium on Tribology "Tribology - The Jost Report - 50 years on", University of Leeds, UK, 6-9 September 2016.
• Clarke, A., Sharif, K., Evans, H. P., Frazer, R. and Shaw, B. 2016. Effects of micro-geometry features and profile error on elastohydrodynamic lubrication of helical gears. Presented at: STLE 71st Annual Meeting and Exhibition, Las Vegas, NV, USA, 21-25 May 2016.

2014

• Clarke, A., Jamali, H., Weeks, I., Sharif, K., Evans, H. P. and Snidle, R. W. 2014. The influence of macro and micro geometry on the generation of adverse contact conditions associated with micropitting in gear tooth contacts. Presented at: Gears 2014 technical awareness seminar, Newcastle, England, 20 November 2014.
• Jamali, H. U., Sharif, K. J., Evans, H. P. and Snidle, R. W. 2014. The transient effects of profile modification on elastohydrodynamic oil films in helical gears. Tribology Transactions 58(1), pp. 119-130. (10.1080/10402004.2014.936990)
• Jamali, H. U., Sharif, K., Evans, H. P. and Snidle, R. W. 2014. Transient EHL analysis of helical gears. Presented at: International Gear Conference 2014, Lyon Villeurbanne, France, 26-28 August 2014International Gear Conference 2014 - Conference Proceedings. Cambridge: Woodhead Publishing pp. 721-730.

2013

• Snidle, R. W., Sharif, K., Evans, H. P. and Jamali, H. 2013. Transient elastohydrodynamic analysis of helical gear tooth contacts. Presented at: 68th STLE Annual Meeting & Exhibition, Detroit Marriott at the Renaissance Center Detroit, MI, USA, 5-9 May 2013.
• Fabre, A., Evans, H. P., Barrallier, L., Sharif, K. and Desvignes, M. 2013. Prediction of microgeometrical influences on micropitting fatigue damage on 32CrMoV13 steel. Tribology International 59, pp. 129-140. (10.1016/j.triboint.2012.07.018)
• Evans, H. P., Snidle, R. W., Sharif, K., Shaw, B. A. and Zhang, J. 2013. Analysis of Micro-Elastohydrodynamic Lubrication and Prediction of Surface Fatigue Damage in Micropitting Tests on Helical Gears. Journal of Tribology 135(1), article number: 11501. (10.1115/1.4007693)
• Jamali, H. U., Sharif, K., Evans, H. P. and Snidle, R. W. 2013. Analysis of elastohydrodynamic lubrication of helical gear tooth contacts including the effects of crowning and the form of tip relief. Presented at: International Conference on Gears 2013, Dusseldorf, Germany, 7-9 October 2013.

2012

• Sharif, K., Evans, H. P. and Snidle, R. 2012. Modelling of elastohydrodynamic lubrication and fatigue of rough surfaces: The effect of lambda ratio. Journal of Engineering Tribology 226(12), pp. 1039-1050. (10.1177/1350650112458220)
• Evans, H. P., Snidle, R. W., Sharif, K. and Bryant, M. J. 2012. Predictive modelling of fatigue failure in concentrated lubricated contacts. Faraday Discussions 156(1), pp. 105-121. (10.1039/c2fd00116k)

2011

• Evans, H. P., Snidle, R. W. and Sharif, K. 2011. Analysis of micro-elastohydrodynamic lubrication and surface fatigue in gear micropitting tests. Presented at: ASME 2011 International Design Engineering Technical Conferences (IDETC), Washington, D. C., USA, 29-31 August 2011ASME Conference Proceedings: Volume 8: 11th International Power Transmission and Gearing Conference; 13th International Conference on Advanced Vehicle and Tire Technologies. ASME pp. 585-591., (10.1115/DETC2011-47714)
• Fabre, A., Evans, H. P., Barrallier, L., Sharif, K. and Desvignes, M. 2011. Prediction of microgeometrical influences on micropitting fatigue damage on 32CrMoV13 steel. Presented at: 38th Leeds-Lyon Symposium on Tribology, Lyon, France, 6-9 September 2011.

2010

• Evans, H. P., Clarke, A., Sharif, K. and Snidle, R. W. 2010. The role of heat partition in elastohydrodynamic lubrication. Tribology Transactions 53(2), pp. 179-188. (10.1080/10402000903097452)
• Evans, H. P., Sharif, K., Clarke, A. and Snidle, R. W. 2010. The Role of Heat Partition in Elastohydrodynamic Lubrication. Presented at: 5th China International Symposium on Tribology (CIST2008) and 1st International Tribology Symposium of IFToMM (ITS-IFToMM2008), Beijing, China, 24-27 September 2008 Presented at Luo, J. et al. eds.Advanced Tribology: Proceedings of CIST2008 & ITS-IFToMM2008. Berlin: Springer pp. 48-49., (10.1007/978-3-642-03653-8_19)

2009

• Evans, H. P., Snidle, R. W. and Sharif, K. 2009. Deterministic mixed lubrication modelling using roughness measurements in gear applications. Tribology International 42(10), pp. 1406-1417. (10.1016/j.triboint.2009.05.025)
• Carli, M., Sharif, K., Ciulli, E., Evans, H. P. and Snidle, R. W. 2009. Thermal point contact EHL analysis of rolling/sliding contacts with experimental comparison showing anomalous film shapes. Tribology International 42(4), pp. 517-525. (10.1016/j.triboint.2008.07.011)
• Clarke, A., Sharif, K., Evans, H. P. and Snidle, R. W. 2009. Heat partition in elastohydrodynamic lubrication. Presented at: Annual European Rheology Conference (AERC 2009), Cardiff, UK, 15 - 17 April 2009.

2007

• Carli, M., Sharif, K., Evans, H. P. and Snidle, R. W. 2007. Numerical and experimental investigation of thermo-elastohydrodynamic point contacts. Presented at: Proceedings of the Joint European Conference on Tribology (ECOTRIB07), Ljubljana, Slovenia.
• Clarke, A., Sharif, K., Evans, H. P. and Snidle, R. W. 2007. Elastohydrodynamic modelling of heat partition in rolling-sliding point contacts. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 221, pp. 223-235. (10.1243/13506501JET219)

2006

• Clarke, A., Sharif, K., Evans, H. P. and Snidle, R. W. 2006. Elastohydrodynamic modelling of heat partition in rolling-sliding point contacts. Presented at: 34th Leeds-Lyon Tribology Symposium, Leeds, UK, 4-7 September 2006.
• Sharif, K., Evans, H. P., Snidle, R. W., Barnett, D. and Egorov, I. M. 2006. The effect of elastohydrodynamic film thickness on a wear model for worm gears. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 220(3), pp. 295-306. (10.1243/13506501JET122)
• Clarke, A., Sharif, K., Evans, H. P. and Snidle, R. W. 2006. Heat partition in rolling/sliding elastohydrodynamic contacts. Transactions of the ASME Journal of Tribology 128(1), pp. 67-78. (10.1243/13506501JET219)

2004

• Clarke, A., Sharif, K., Evans, H. P. and Snidle, R. W. 2004. Heat partition in rolling/sliding elastohydrodynamic contacts. Presented at: ASME/STLE International Joint Tribology Conference, Long Beach, CA, USA, 24 - 27 October 2004Proceedings of the ASME/STLE International Joint Tribology Conference, 2004 : presented at 2004 ASME/STLE International Joint Tribology Conference, October 24-27, 2004, Long Beach, California, USA. ASME pp. 479-493.
• Sharif, K., Evans, H. P. and Snidle, R. W. 2004. Wear modelling of worm gears. Presented at: IUTAM Symposium on Elastohydrodynamics and Microelastohydrodynamics, Cardiff, UK, 1-3 September 2004 Presented at Snidle, R. W. and Evans, H. P. eds. Springer pp. 371-383.

2003

• Sharif, K., Evans, H. P., Snidle, R. W. and Newall, J. P. 2003. Modelling of film thickness and traction in a variable ratio traction drive rig. Presented at: ASME/AGMA International Power Transmission and Gearing Conference, Chicago, USA.

2001

• Sharif, K., Kong, S., Evans, H. P. and Snidle, R. W. 2001. Contact and elastohydrodynamic analysis of worm gears, Part 1: Theoretical formulation. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 215(7), pp. 817-830. (10.1243/0954406011524171)
• Sharif, K., Kong, S., Evans, H. P. and Snidle, R. W. 2001. Contact and elastohydrodynamic analysis of worm gears: Part 2, results. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science 215(7), pp. 831-846. (10.1243/0954406011524180)
• Sharif, K., Kong, S., Evans, H. P. and Snidle, R. W. 2001. Elastohydrodynamic analysis of worm gear contacts. Presented at: Proceedings of the International Tribology Conference, Japanese Society of Tribologists, Tokyo, Japan. pp. 1867-1872.

2000

• Sharif, K., Morris, S. J., Evans, H. P. and Snidle, R. W. 2000. Comparison of non-Newtonian EHL models in high sliding applications.. Presented at: Proceedings 27th Leeds/Lyon Symposium on Tribology, Lyon, France. Elsevier pp. 787-796.