Cyhoeddiadau 2022

Calotescu, I. et al., 2022. 8th European-African Conference on Wind Engineering (8EACWE2022), September 20-23. Bucharest, Romania: Publishing Conspress. (10.5281/zenodo.8092029)
Borodich, F. M. and Jin, X. eds. 2022. Contact problems for soft, biological and bioinspired materials. Biologically-Inspired Systems Springer Cham. (10.1007/978-3-030-85175-0)
Abd-El-Hakeem Mohamed, M. et al., 2022. A neuro-predictive controller scheme for integration of a basic wind energy generation unit with an electrical power system. Energies 15 (16) e5839. (10.3390/en15165839)
Abdelrahim, M. et al., 2022. Techno-economic analysis of a wind-energy-based charging station for electric vehicles in high-rise buildings in Malaysia. Energies 15 (15) e5412. (10.3390/en15155412)
Abdelrahman, M. A. et al. 2022. Modified unified power flow controller for medium voltage distribution networks. IET Generation, Transmission and Distribution 16 (19), pp.3849-3859. (10.1049/gtd2.12567)
Abdi, S. et al., 2022. Modelling the effect of thermal aging on transformer oil electrical characteristics using a regression approach. Energies 16 (1) 381. (10.3390/en16010381)
Abdul Samad, B. et al. 2022. A hybrid Fuzzy approach of different controllers to stabilize a 3-link swinging robotic (Robogymnast). Presented at: 2nd International Conference on Advance Computing and Innovative Technologies in Engineering (ICACITE) Greater Noida, India 28-29 April 2022. Proceedings of 2nd International Conference on Advance Computing and Innovative Technologies in Engineering. IEEE. , pp.2433-2437. (10.1109/ICACITE53722.2022.9823768)
Abdul samad, B. et al. 2022. An investigation of various controller designs for multi-link robotic system (Robogymnast). Knowledge 2 (3), pp.465-486. (10.3390/knowledge2030028)
Abdullah, J. Y. et al., 2022. A combined imaging, deformation and registration methodology for predicting respirator fitting. PLoS ONE 17 (11) e0277570. (10.1371/journal.pone.0277570)
Abdusalam, O. , Anayi, F. and Packianather, M. 2022. Discrimination between internal current and external fault in three phase power transformer by Using alienation coefficient. Presented at: 2022 57th International Universities Power Engineering Conference (UPEC) Istanbul, Turkey 30 Aug 22 - 02 Sept 22. 2022 57th International Universities Power Engineering Conference (UPEC). IEEE. (10.1109/UPEC55022.2022.9917688)
Abdusalam, O. et al. 2022. New hybrid machine learning method for detecting faults in three-phase power transformers. Energies 15 (11) e3905. (10.3390/en15113905)
Abed, M. E. A. et al., 2022. Experimental investigation on dielectric/electric properties of aged polymeric insulator: correlation of permittivity and dielectric loss tangent with surface hydrophobicity. Electrical Engineering 104 , pp.1539-1552. (10.1007/s00202-021-01405-3)
Abeynayake, G. , Cipcigan, L. and Ding, X. 2022. Black Start Capability from Large Industrial Consumers. Energies 15 (19) 7262. (10.3390/en15197262)
AboRas, K. M. et al., 2022. Voltage and frequency regulation in smart grids via a unique fuzzy PIDD2 controller optimized by gradient-based optimization algorithm. Energy Reports 9 , pp.1201-1235. (10.1016/j.egyr.2022.12.054)
Adams, R. et al. 2022. Finite element-based optimisation of an elastomeric honeycomb for impact mitigation in helmet liners. International Journal of Mechanical Sciences 214 106920. (10.1016/j.ijmecsci.2021.106920)
Adams, R. et al. 2022. Mechanical behaviour of additively manufactured elastomeric pre-buckled honeycombs under quasi-static and impact loading. Materials & Design 213 110368. (10.1016/j.matdes.2021.110368)
Adzic, F. et al., 2022. Large-eddy simulation of supercritical free-surface flow in an open-channel contraction. Journal of Hydraulic Research 60 (4), pp.628-644. (10.1080/00221686.2022.2041496)
Afrane, S. et al., 2022. Integrated ahp-topsis under a fuzzy environment for the selection of waste-to-energy technologies in Ghana: a performance analysis and socio-enviro-economic feasibility study. International Journal of Environmental Research and Public Health 19 (14) 8428. (10.3390/ijerph19148428)
Afzal, M. Z. et al., 2022. A resilience-oriented bidirectional anfis framework for networked microgrid management. Processes 10 (12) 2724. (10.3390/pr10122724)
Agathos, K. et al., 2022. An adapted deflated conjugate gradient solver for robust extended/generalised finite element solutions of large scale, 3D crack propagation problems. Computer Methods in Applied Mechanics and Engineering 395 114937. (10.1016/j.cma.2022.114937)
Aghadavoudi Jolfaei, M. et al., 2022. Non-destructive evaluation of magnetic anisotropy associated with crystallographic texture of interstitial free steels using an electromagnetic sensor. [Online].SSRN: Elsevier. (10.2139/ssrn.4267904)Available at: http://dx.doi.org/10.2139/ssrn.4267904.
Agyekum, E. B. et al., 2022. Technical performance prediction and employment potential of solar PV systems in cold countries. Sustainability 14 (6) 3546. (10.3390/su14063546)
Ahmed, U. , Petri, I. and Rana, O. 2022. Edge-cloud resource federation for sustainable cities. Sustainable Cities and Society 82 103887. (10.1016/j.scs.2022.103887)
Ai, C. et al., 2022. Three-dimensional non-hydrostatic model for dam-break flows. Physics of Fluids 34 (2) 022105. (10.1063/5.0081094)
Ai, C. et al., 2022. An efficient 3D non-hydrostatic model for predicting nonlinear wave interactions with fixed floating structures. Ocean Engineering 248 110810. (10.1016/j.oceaneng.2022.110810)
Ai, C. et al., 2022. Vortex shedding and evolution induced by the interactions between a solitary wave and a submerged horizontal plate. Journal of Hydraulic Research 60 (2), pp.311-325. (10.1080/00221686.2021.2001594)
Akhimien, N. G. and Dimuna, K. 2022. Adaptability in energy efficient office building design. International Journal of Architecture, Arts and Applications 8 (3), pp.106-111. 12. (10.11648/j.ijaaa.20220803.12)
Al-Azzawi, A. S. M. , Kawashita, L. F. and Featherston, C. A. 2022. Predicting interlaminar damage behaviour of fibre-metal laminates containing adhesive joints under bending loads. Journal of Reinforced Plastics and Composites 41 (5-6), pp.167-186. (10.1177/07316844211051706)
Al-Azzawi, A. S. et al. 2022. A novel semi-analytical approach for predicting the buckling and postbuckling behaviour of Glare fibre metal laminates. Thin-Walled Structures 181 109987. (10.1016/j.tws.2022.109987)
Al-Moftah, A. M. S. H. 2022. Thermal kinetics study of paper and plastic waste gasification. PhD Thesis , Cardiff University.
Al-Moftah, A. M. S. H. , Marsh, R. and Steer, J. 2022. Thermogravimetric kinetic analysis of non-recyclable waste CO2 gasification with catalysts using coats–redfern method. ChemEngineering 6 (2) 22. (10.3390/chemengineering6020022)
Al-Shidhani, M. and Gao, M. 2022. Improving angular response of crossed compound parabolic concentrators using rectangular entry aperture. Renewable Energy 204 , pp.1-10. (10.1016/j.renene.2022.12.104)
Alamri, N. M. , Packianather, M. and Bigot, S. 2022. Deep learning: parameter optimization using proposed novel hybrid bees Bayesian convolutional neural network. Applied Artificial Intelligence 36 (1) 2031815. (10.1080/08839514.2022.2031815)
Alamri, N. M. H. , Packianather, M. and Bigot, S. 2022. Optimization of convolutional neural network topology and training parameters using Bees Algorithm. Presented at: IEEE 2nd International Symposium on Sustainable Energy, Signal Processing and Cyber Security (iSSSC) Gunupur, Odisha, India 15-17 December 2022. Proceedings of 2nd International Symposium on Sustainable Energy, Signal Processing and Cyber Security. IEEE. , pp.1-6. (10.1109/iSSSC56467.2022.10051487)
Alamri, N. M. H. , Packianather, M. and Bigot, S. 2022. Predicting the porosity in selective laser melting parts using hybrid regression convolutional neural network. Applied Sciences 12 (24) 12571. (10.3390/app122412571)
Alathbah, M. 2022. Development and modelling of gallium nitride based lateral schottky barrier diodes with anode recesses for mmwave and thz applications. Micromachines 14 (1) 2. (10.3390/mi14010002)
Alathbah, M. 2022. GaN HEMT based technology development for millimetre wave applications. PhD Thesis , Cardiff University.
Alathbah, M. and Elgaid, K. 2022. Miniature mesa extension for a planar submicron AlGaN/GaN HEMT gate formation. Micromachines 13 (11) 2007. (10.3390/mi13112007)
Alex, A. and Masoero, E. 2022. Autogenous healing in cement: A kinetic Monte Carlo simulation of CaCO3 precipitation. In: Meschke, G. , Pichler, B. and Rots, J. G. eds. Computational Modelling of Concrete and Concrete Structures. Taylor and Francis. , pp.102-107. (10.1201/9781003316404-12)
Alexopoulos, T. 2022. Process design and supervision: A next generation simulation approach to digitalised manufacturing. PhD Thesis , Cardiff University.
Algarni, S. K. 2022. Machine learning for improved detection and segmentation of building boundary. PhD Thesis , Cardiff University.
Alghamdi, M. , Beach, T. and Rezgui, Y. 2022. Reviewing the effects of deploying Building Information Modelling (BIM) on the adoption of sustainable design in Gulf countries: a case study in Saudi Arabia. City, Territory and Architecture 9 (18)(10.1186/s40410-022-00160-7)
Alghamdi, T. 2022. Analysis and solutions of power harmonics in medium voltage distribution networks. PhD Thesis , Cardiff University.
Alghamdi, T. A. H. and Anayi, F. 2022. Performance of different structures of artificial neural network systems for harmonic estimation of grid-tied power conversion systems. Presented at: 6th International Conference on Power and Energy Engineering (ICPEE) Shanghai, China 25-27 November 2022. Proceedings of 6th International Conference on Power and Energy Engineering. IEEE. , pp.187-190. (10.1109/ICPEE56418.2022.10050331)
Alghamdi, T. A. H. , Anayi, F. and Packianather, M. 2022. Modelling and control development of a cascaded NPC-based MVDC converter for harmonic analysis studies in power distribution networks. Energies 15 (13) 4867. (10.3390/en15134867)
Alghamdi, T. A. H. , Anayi, F. and Packianather, M. 2022. Optimal design of passive power filters using the MRFO algorithm and a practical harmonic analysis approach including uncertainties in distribution networks. Energies 15 (7) 2566. (10.3390/en15072566)
Alghamdi, T. A. H. and Anayi, F. J. 2022. Analysis of harmonic propagations in Albaha power network due to the implementation of an MVDC converter. Presented at: IEEE PES Innovative Smart Grid Technologies - Asia (ISGT Asia) Brisbane, Australia 5-8 Dec 2021. Proceedings of IEEE PES Innovative Smart Grid Technologies - Asia (ISGT Asia). IEEE. (10.1109/ISGTAsia49270.2021.9715713)
Alghamdi, T. A. H. and Anayi, F. J. 2022. Modelling and control development of an MVDC converter implemented for Albaha power network. Presented at: 5th International Conference on Power and Energy Engineering Xiamen, China 2-4 Dec 2021. 2021 5th International Conference on Power and Energy Engineering (ICPEE). IEEE. , pp.66-72. (10.1109/ICPEE54380.2021.9662568)
Ali, A. et al., 2022. Nanorobotics: next level of military technology. Presented at: 2022 International Conference on Business Analytics for Technology and Security (ICBATS) 16-17 February 2022. 2022 International Conference on Business Analytics for Technology and Security (ICBATS) Proceedings. IEEE. (10.1109/ICBATS54253.2022.9759048)
Ali, M. H. et al., 2022. Single- and multi-objective modified aquila optimizer for optimal multiple renewable energy resources in distribution network. Mathematics 10 (12) 2129. (10.3390/math10122129)
Alkhathami, H. M. 2022. Reaction kinetics in biomass gasification (chemical engineering). PhD Thesis , Cardiff University.
Almolliyeh, M. 2022. An experimental investigation of adsorption and desorption characteristics of coal and rock. PhD Thesis , Cardiff University.
Almudaihesh, F. et al. 2022. A comparison study of water diffusion in unidirectional and 2D woven carbon/epoxy composites. Polymer Composites 43 (1), pp.118-129. (10.1002/pc.26361)
Almuktar, S. et al. 2022. Recycling of domestic wastewater treated by vertical-flow wetlands for irrigating Chillies and Sweet Peppers. Agricultural Water Management 149 (10.1016/j.agwat.2014.10.025)
Almuktar, S. A. A. A. N. et al. 2022. Assessment of capsicum annuum L. grown in controlled and semi-controlled environments irrigated with greywater treated by floating wetland systems. Agronomy 11 (9) 1817. (10.3390/agronomy11091817)
Almuktar, S. A. A. A. N. , Abed, S. N. and Scholz, M. 2022. Wetlands for wastewater treatment and subsequent recycling of treated effluent: a review. Environmental Science and Pollution Research 25 (24)(10.1007/s11356-018-2629-3)
Alnajideen, M. , Al-Shidhani, M. and Min, G. 2022. A comparative study of 3d printed non-imaging solar v-trough and compound parabolic concentrators for low-cost, high-performance cpv applications. Presented at: 2022 IEEE 49th Photovoltaics Specialists Conference (PVSC) Philadelphia, USA 5-10TH June, 2022. 2022 IEEE 49th Photovoltaics Specialists Conference (PVSC). IEEE. (10.1109/PVSC48317.2022.9938472)
Alnajideen, M. and Gao, M. 2022. A new configuration of V-trough concentrator for achieving improved concentration ratio of >3.0x. Solar Energy Materials and Solar Cells 245 111877. (10.1016/j.solmat.2022.111877)
Alnajideen, M. and Min, G. 2022. Hybrid photovoltaic-thermoelectric system using a novel spectral splitting solar concentrator. Energy Conversion and Management 251 114981. (10.1016/j.enconman.2021.114981)
Alnasif, A. et al. 2022. Performance investigation of currently available reaction mechanisms in the estimation of NO measurements: a comparative study. Presented at: 1st Symposium on Ammonia Energy 1 - 2 September 2022.
Alnasif, A. et al. 2022. Experimental and numerical analyses of nitrogen oxides formation in a high ammonia-low hydrogen blend using a tangential swirl burner. Carbon Neutrality 1 24. (10.1007/s43979-022-00021-9)
Alnasif, A. et al. 2022. Experimental and numerical comparison of currently available reaction mechanisms for laminar flame speed in hydrogen/ammonia flames. Presented at: SET2022: International Conference on Sustainable Energy and Technologies 16-18 August 2022. 19th International Conference on Sustainable Energy Technologies – SET 2022.
Alqahtani, S. et al. 2022. Frequency stability in renewable-rich modern power systems, Saudi grid case study. Presented at: 57th International Universities Power Engineering Conference (UPEC) Istanbul, Turkey 30 Aug - 2 Sept 2022. Proccedings of 57th International Universities Power Engineering Conference (UPEC). IEEE. (10.1109/UPEC55022.2022.9917788)
Alqazzaz, S. et al., 2022. Combined features in region of interest for brain tumor segmentation. Journal of Digital Imaging 35 , pp.938-946. (10.1007/s10278-022-00602-1)
Alrebei, O. F. et al., 2022. State of the art in separation processes for alternative working fluids in clean and efficient power generation. Separations 9 (1) 14. (10.3390/separations9010014)
Alrebei, O. F. et al., 2022. Numerical investigation of a first-stage stator turbine blade subjected to nh3?h2/air combustion flue gases. International Journal of Hydrogen Energy 47 (78), pp.33479-33497. (10.1016/j.ijhydene.2022.07.190)
Alrebei, O. F. et al., 2022. Quantifying CO2 emissions and energy production from power plants to run HVAC systems in ASHRAE-based buildings. Energies 15 (23) 8813. (10.3390/en15238813)
Alruwaili, M. 2022. Sustainable airports: green energy solutions to achieve carbon neutrality. PhD Thesis , Cardiff University.
Alruwaili, M. and Cipcigan, L. 2022. Airport electrified ground support equipment for providing ancillary services to the grid. Electric Power Systems Research 211 108242. (10.1016/j.epsr.2022.108242)
Alruwaili, M. and Cipcigan, L. 2022. Optimal annual operational cost of a hybrid renewable-based microgrid to increase the power resilience of a critical facility. Energies 15 (21) 8040. (10.3390/en15218040)
Alruwaili, M. and Cipcigan, L. 2022. Optimal grid-connected hybrid renewable energy system for a civilian airport. Presented at: IEEE International Conference on Environment and Electrical Engineering and 2022 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe) 28 June - 01 July 2022. 2022 IEEE International Conference on Environment and Electrical Engineering and 2022 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe). IEEE. (10.1109/EEEIC/ICPSEurope54979.2022.9854755)
Alsaegh, A. 2022. Fundamental characterisation of coherent structures for swirl combustors. PhD Thesis , Cardiff University.
Alshahrani, A. , Cui, T. and Kulasegaram, S. 2022. Effect of sand to aggregate ratio on the properties of self-compacting high-performance concrete. International Journal of Civil Infrastructure (IJCI) 5 , pp.37-42. (10.11159/ijci.2022.006)
Alshahrani, A. , Cui, T. and Kulasegaram, S. 2022. Influence of sand to aggregate ratio on the fresh and mechanical properties of self-compacting high-performance concrete. Presented at: The 7th World Congress on Civil, Structural, and Environmental Engineering (CSEE'22) 10-12 April 2022. Proceedings of the 7th World Congress on Civil, Structural, and Environmental Engineering (CSEE'22). ICSECT(10.11159/icsect22.171)
Alshbib, M. M. et al., 2022. Performance enhancement of direct torque and rotor flux control (dtrfc) of a three-phase induction motor over the entire speed range: experimental validation. Machines 11 (1) 22. (10.3390/machines11010022)
Altayef, E. et al. 2022. Detection and classification of lamination faults in A 15 kVA three-phase transformer core using SVM, KNN and DT algorithms. IEEE Access 10 , pp.50925-50932. (10.1109/ACCESS.2022.3174359)
Altayef, E. , Anayi, F. and Packianather, M. 2022. A new enhancement of the k-NN algorithm by Using an optimization technique. Presented at: 2nd International Conference on Advance Computing and Innovative Technologies in Engineering (ICACITE) Greater Noida, India 28-29 April 2022. Proceedings of 2nd International Conference on Advance Computing and Innovative Technologies in Engineering. IEEE. , pp.24-31. (10.1109/ICACITE53722.2022.9823537)
Altayef, E. , Anayi, F. and Packianather, M. 2022. Experimental investigation on impacts of insulation damage fault between laminations of power transformers. Presented at: 2nd International Conference on Advance Computing and Innovative Technologies in Engineering (ICACITE) Greater Noida, India 28-29 April 2022. Proceedings of 2nd International Conference on Advance Computing and Innovative Technologies in Engineering. IEEE. , pp.19-23. (10.1109/ICACITE53722.2022.9823834)
Altayef, E. , Anayi, F. and Packianather, M. 2022. Power transformer fault detection methods and effects of edge burrs fault: a review. Presented at: 2nd International Conference on Advance Computing and Innovative Technologies in Engineering (ICACITE) Greater Noida, India 28-29 April 2022. Proceedings of 2nd International Conference on Advance Computing and Innovative Technologies in Engineering. IEEE. , pp.5-18. (10.1109/ICACITE53722.2022.9823815)
Altayef, E. et al. 2022. On the effects of lamination artificial faults in A 15 kVA three-phase transformer core. IEEE Access 10 , pp.19348-19355. (10.1109/ACCESS.2022.3151367)
Althaher, S. Z. et al., 2022. Transactive energy system for distribution network management: procuring residential flexibility services under dynamic pricing. IEEE Access 10 , pp.102019-102032. (10.1109/ACCESS.2022.3208690)
Altuwairgi, A. 2022. Full-spectrum solar energy harvesting for power and heat production using dichroic mirror. PhD Thesis , Cardiff Uuniversity.
Alzahrani, A. et al. 2022. A proposed roadmap for delivering zero carbon fishery ports. Presented at: 8th International Conference on Energy and Environment Research (ICEER 2021) Rome, Italy 13-17 September 2021. Published in: Caetano Nidia, S. et al., Energy Reports: The 8th International Conference on Energy and Environment Research – “Developing the World in 2021 with Clean and Safe Energy”. Vol. 8 (3).Vol. 3. Elsevier. , pp.82-88. (10.1016/j.egyr.2022.01.083)
Amalanathan, A. et al., 2022. Impact of silver sulfide on rheology and streaming electrification of mineral oil and mixed fluid. Journal of Electrostatics 119 103747. (10.1016/j.elstat.2022.103747)
Ambreen, T. , Saleem, A. and Park, C. W. 2022. Numerical modeling of nanofluids' flow and heat transfer. In: Ali, ed. Advances in Nanofluid Heat Transfer. Elsevier. , pp.151-202. (10.1016/B978-0-323-88656-7.00015-5)
Amhamed, A. I. et al., 2022. Ammonia production plants - a review. Fuels 3 (3), pp.408-435. (10.3390/fuels3030026)
Amin, A. 2022. Stochastic community domestic energy modelling. PhD Thesis , Cardiff University.
Amin, A. et al. 2022. Demand response in buildings: Unlocking energy flexibility through district-level electro-thermal simulation. Applied Energy 305 117836. (10.1016/j.apenergy.2021.117836)
Ampah, J. D. et al., 2022. Progress and recent trends in the application of nanoparticles as low carbon fuel additives?A state of the art review. Nanomaterials 12 (9) 1515. (10.3390/nano12091515)
An, D. et al., 2022. A simple method for estimating macroalgae area under clouds on MODIS imagery. Frontiers in Marine Science 9 995731. (10.3389/fmars.2022.995731)
An, N. , Zagorščak, R. and Thomas, H. R. 2022. Adsorption characteristics of rocks and soils, and their potential for mitigating the environmental impact of underground coal gasification technology: a review. Journal of Environmental Management 305 114390. (10.1016/j.jenvman.2021.114390)
An, N. , Zagorscak, R. and Thomas, H. R. 2022. Transport of heat, moisture, and gaseous chemicals in hydro-mechanically altered strata surrounding the underground coal gasification reactor. International Journal of Coal Geology 249 103879. (10.1016/j.coal.2021.103879)
Angamuthu, R. et al., 2022. LG 55 nm T-gate InGaN/GaN channel based high electron mobility transistors for stable transconductance operation. International Journal of RF and Microwave Computer-Aided Engineering 32 (10) e23308. (10.1002/mmce.23308)
Aoki, G. et al., 2022. Nursing care teaching system using mixed reality technology. Presented at: The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec) Japan 01-04 June 2022. Vol. 2022.Vol. 0. , pp.2P2-G07. (10.1299/jsmermd.2022.2P2-G07)
Argatov, I. , Borodich, F. M. and Jin, X. 2022. Atomic force microscopy of polymer brushes: insights into controversies. Frontiers in Mechanical Engineering 8 931271. (10.3389/fmech.2022.931271)
Assadi-Langroudi, A. et al., 2022. Recent advances in nature-inspired solutions for ground engineering (NiSE). International Journal of Geosynthetics and Ground Engineering 8 3. (10.1007/s40891-021-00349-9)
Atia, A. , Anayi, F. and Gao, M. 2022. Influence of shading on solar cell parameters and modelling accuracy improvement of pv modules with reverse biased solar cells. Energies 15 (23) 9067. (10.3390/en15239067)
Awosusi, A. A. et al., 2022. A roadmap toward achieving sustainable environment: evaluating the impact of technological innovation and globalization on load capacity factor. International Journal of Environmental Research and Public Health 19 (6) 3288. (10.3390/ijerph19063288)
Azad, E. M. et al. 2022. New formulation of Cardiff behavioral model including DC bias voltage dependence. IEEE Microwave and Wireless Components Letters 32 (6), pp.607-610. (10.1109/LMWC.2022.3140653)
Azad, E. M. et al. 2022. DC-dependent Cardiff model from modulated supply and load-pull data. Presented at: 2022 Asia-Pacific Microwave Conference (APMC) Yokohama, Japan 29 November 2022 - 02 December 2022. Proceedings of 2022 Asia-Pacific Microwave Conference (APMC). IEEE. , pp.181-183. (10.23919/APMC55665.2022.9999796)
Azad, E. M. et al. 2022. Load-pull data analysis of a GaN on SiC HEMT targeting multi bias Doherty design. Presented at: International Workshop on Integrated Nonlinear Microwave and Millimeterwave Circuits, INMMIC Cardiff, UK 7-8 April 2022. Proceedings of the 2022 International Workshop on Integrated Nonlinear Microwave and Millimetre-Wave Circuits. IEEE. (10.1109/INMMiC54248.2022.9762106)
Azad, E. M. et al. 2022. Cardiff model utilization for predicting the response of multiple-input power amplifiers. Presented at: Mediterrannean Microwave Symposium (MMS) Pizzo Calabro, Italy 9-13 May 2022. Proceedings of Microwave Mediterranean Symposium (MMS). IEEE. (10.1109/MMS55062.2022.9825516)
Azizova, L. et al. 2022. Parameters controlling octadecyl phosphonic acid self-assembled monolayers on titanium dioxide for anti-fouling biomedical applications. Applied Surface Science 604 154462. (10.1016/j.apsusc.2022.154462)
Azua-Gonzalez, C. 2022. Multiscale fracture modelling of concrete using a variational micromechanics-enriched embedded strong discontinuity Finite Element Method. PhD Thesis , Cardiff University.
Baddeley, A. et al. 2022. Gate bias voltage dependence of Cardiff admittance model in Ka-band GaAs pHEMTs. Presented at: IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR) Las Vegas, NV, USA 16-19 January 2022. 2022 IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR). IEEE. , pp.8-10. (10.1109/PAWR53092.2022.9719858)
Bagga, M. et al., 2022. Advancements in bacteria based self-healing concrete and the promise of modelling. Construction and Building Materials 358 129412. (10.1016/j.conbuildmat.2022.129412)
Balasubramaniam, K. et al., 2022. Multi step structural health monitoring approaches in debonding assessment in a sandwich honeycomb composite structure using ultrasonic guided waves. Measurement 194 111057. (10.1016/j.measurement.2022.111057)
Banerjee, J. , Kennedy, D. and Elishakoff, I. 2022. Further insights into the Timoshenko-Ehrenfest beam theory. Journal of Vibration and Acoustics 144 (6) 061011. (10.1115/1.4055974)
Baqain, S. 2022. Investigations into AFM-tip based vibration-assisted nanomachining. PhD Thesis , Cardiff University.
Baqain, S. , Borodich, F. and Brousseau, E. 2022. Theoretical study of factors affecting the effective rake angle of AFM tips for nanomachining applications. Presented at: 7th International Conference on Nanomanufacturing Xi’an, China 17-19 Nov 2021. Proceedings of the 7th International Conference on Nanomanufacturing (nanoMan2021). Vol. 296.Smart Innovation, Systems and Technologies Singapore: Springer. , pp.131–139. (10.1007/978-981-19-1918-3_15)
Baqain, S. , Borodich, F. M. and Brousseau, E. 2022. Characterisation of an AFM tip bluntness using indentation of soft materials. In: Borodich, F. and Jin, X. eds. Contact Problems for Soft, Biological and Bioinspired Materials. Vol. 15, Biologically-Inspired Systems Cham: , pp.221-242. (10.1007/978-3-030-85175-0_11)
Barter, M. et al. 2022. Design considerations of a dual mode X-band EPR resonator for rapid in-situ microwave heating. Applied Magnetic Resonance 53 , pp.861-874. (10.1007/s00723-022-01463-1)
Bastida, H. et al. 2022. Dynamic modelling of ice-based thermal energy storage for cooling applications. IET Energy Systems Integration 4 (3), pp.317-334. (10.1049/esi2.12061)
Bastida, H. et al., 2022. An experimental facility for latent heat thermal energy storage units. Presented at: IEEE 7th International Energy Conference (ENERGYCON) Riga, Latvia 9-12 May 2022. Proceedings of IEEE International Energy Conference and Exhibition (EnergyCon). IEEE. (10.1109/ENERGYCON53164.2022.9830278)
Bastida, H. et al., 2022. An experimental facility for latent heat thermal energy storage units. Presented at: ENERGYCON 2022 Riga, Latvia 2-12 May 2022.
Bengtson, M. et al., 2022. A usability study of an innovative optical device for the diagnosis of schistosomiasis in Nigeria. Presented at: Global Humanitarian Technology Conference (GHTC) Santa Clara, CA, USA 8-11 September 2022. Proceedings of Global Humanitarian Technology Conference. IEEE. , pp.17-22. (10.1109/GHTC55712.2022.9911019)
Bennion, N. J. et al. 2022. In vivo measurement of human brain material properties under quasi-static loading. Journal of the Royal Society. Interface 19 (197) 20220557. (10.1098/rsif.2022.0557)
Berthelson, P. R. et al., 2022. Evaluation of occupant neck injury response to varied impact conditions using a finite element-mathematical surrogate modeling approach. International Journal of Crashworthiness 27 (6), pp.1726-1742. (10.1080/13588265.2021.2008192)
Bertolesi, E. et al. 2022. Experimental characterization of the textile-to-mortar bond through distributed optical sensors. Construction and Building Materials 326 126640. (10.1016/j.conbuildmat.2022.126640)
Bhaduri, D. 2022. From waste to worth: Circular hybrid manufacturing of sustainable additive manufacturing powders from machining scraps. Presented at: 4th International Conference on Recent Advances in Mechanical Infrastructure India 16 -18 December 2022.
Bhaduri, D. et al. 2022. A pilot study for the generation of sustainable powders for metal additive manufacturing. Presented at: CIRP Winter Meeting 2022, STC 'E' Paris, France 16-18 February 2022.
Biggs, P. et al. 2022. Gait function improvements, using Cardiff Classifier, are related to patient-reported function and pain following hip arthroplasty. Journal of Orthopaedic Research 40 (5), pp.1182-1193. (10.1002/jor.25149)
Binks, D. J. et al., 2022. Cubic GaN and InGaN/GaN quantum wells. Applied Physics Reviews 9 041309. (10.1063/5.0097558)
Bisagni, C. et al., 2022. Comparison of numerical analyses of a composite wing component subjected to 4-point bending. Composites Part C: Open Access 8 100264. (10.1016/j.jcomc.2022.100264)
Bishop, S. G. et al. 2022. Evanescent-field assisted photon collection from quantum emitters under a solid immersion lens. New Journal of Physics 24 103027. (10.1088/1367-2630/ac9697)
Bishop, S. G. et al. 2022. Enhanced light collection from a gallium nitride color center using a near index-matched solid immersion lens. Applied Physics Letters 120 114001. (10.1063/5.0085257)
Bishop, S. 2022. Room temperature III-nitride quantum light sources. PhD Thesis , Cardiff University.
Bogusz, A. 2022. Device level characterization of outphasing amplifiers. PhD Thesis , Cardiff University.
Boje, C. et al. 2022. Digital twins for the built environment. In: Pauwels, P. and McGlinn, K. eds. Buildings and Semantics Data Models and Web Technologies for the Built Environment. London, UK: CRC Press. , pp.179-200. (10.1201/9781003204381-10)
Borodich, F. M. 2022. The JKR formalism in applications to problems of adhesive contact. In: Borodich, F. M. and Jin, X. eds. Contact Problems for Soft, Biological and Bioinspired Materials. Vol. 15, Biologically-Inspired Systems Cham: , pp.243-287. (10.1007/978-3-030-85175-0_12)
Borodich, F. M. and Galanov, B. A. 2022. Adhesive depth-sensing indentation tests: Slopes of the force-displacement curves. Mechanics Research Communications 126 104008. (10.1016/j.mechrescom.2022.104008)
Borodich, F. M. et al. 2022. Adhesion of living cells: mechanisms of adhesion and contact models. In: Borodich, F. M. and Jin, X. eds. Contact Problems for Soft, Biological and Bioinspired Materials. Biologically-Inspired Systems. Vol. 15, Springer. , pp.1-30. (10.1007/978-3-030-85175-0_1)
Borodich, F. M. and Gorb, S. N. 2022. Spreading of red caviar cells: the knife-cell and the cell-cell adhesive interactions. In: Contact Problems for Soft, Biological and Bioinspired Materials. Vol. 15, , pp.117–137. (10.1007/978-3-030-85175-0_7)
Borodich, F. , Galanov, B. and Grigoriev, O. 2022. Adhesion and wear of diamond: Formation of nanocracks and adhesive craters of torn out material. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences (10.1098/rsta.2021.0341)
Boudjella, H. et al., 2022. Magnetic field evaluation around 400 kv underground power cable under harmonics effects. Diagnostyka 23 (2) 2022209. (10.29354/diag/150068)
Bowd, J. 2022. Does gait retraining have the potential to slow OA development and prolong the benefits of knee realignment surgery?. PhD Thesis , Cardiff University.
Bradley, A. et al. 2022. Requirements and process analysis for ports and waterways open BIM ISO standards development. Construction Innovation: Information, Process, Management 22 (4), pp.705-726. (10.1108/CI-02-2021-0032)
Brocchini, M. et al., 2022. Interaction between breaking-induced vortices and near-bed structures. Part 1. Experimental and theoretical investigation. Journal of Fluid Mechanics 940 A44. (10.1017/jfm.2022.260)
Cagni, E. 2022. Automated planning for image-guided radiotherapy. PhD Thesis , Cardiff University.
Cagni, E. et al. 2022. Evaluating the quality of patient-specific deformable image registration in adaptive radiotherapy using a digitally enhanced head and neck phantom. Applied Sciences 12 (19) 9493. (10.3390/app12199493)
Canet, A. et al. 2022. Spatial and temporal data to study residential heat decarbonisation pathways in England and Wales. Scientific Data 9 246. (10.1038/s41597-022-01356-9)
Caredda, G. et al., 2022. Analysing local failure scenarios to assess the robustness of steel truss-type bridges. Engineering Structures 262 114341. (10.1016/j.engstruct.2022.114341)
Castelli, A. et al. 2022. Review of decontamination protocols for shared non-critical objects in 35 policies of UK NHS acute care organizations. Journal of Hospital Infection 120 , pp.65-72. (10.1016/j.jhin.2021.10.021)
Castro-Castellon, A. T. et al. 2022. Ecotoxicity of microplastics to freshwater biota: Considering exposure and hazard across trophic levels. Science of the Total Environment 816 151638. (10.1016/j.scitotenv.2021.151638)
Cere, G. et al. 2022. A machine learning approach to appraise and enhance the structural resilience of buildings to seismic hazards. Structures 45 , pp.1516-1529. (10.1016/j.istruc.2022.09.113)
Cerè, G. et al., 2022. Shear walls optimization in a reinforced concrete framed building for seismic risk reduction. Journal of Building Engineering 54 104620. (10.1016/j.jobe.2022.104620)
Chang, Y. et al., 2022. Capture mechanism and optimal design of micro-particle traps in HVAC/HVDC gas insulated equipment. IEEE Transactions on Power Delivery 37 (6), pp.4700-4710. (10.1109/TPWRD.2022.3155641)
Chaturvedi, S. et al., 2022. CFD-CRN modelling for prediction of pollutants in NH3/H2/air combustion. Presented at: 14th International Conference on Applied Energy 8 - 11 August 2022.
Chaudry, M. et al. 2022. The implications of ambitious decarbonisation of heat and road transport for Britain's net zero carbon energy systems. Applied Energy 305 117905. (10.1016/j.apenergy.2021.117905)
Chen, C. et al., 2022. Extreme events, energy security and equality through micro- and macro-levels: Concepts, challenges and methods. Energy Research and Social Science 85 102401. (10.1016/j.erss.2021.102401)
Chen, C. et al., 2022. Spatial-attention-based convolutional transformer for bearing remaining useful life prediction. Measurement Science and Technology 33 (11) 114001. (10.1088/1361-6501/ac7c5b)
Chen, C. , Wu, D. and Liu, Y. 2022. Recent advances of AI for engineering service and maintenance. Autonomous Intelligent Systems 2 (1) 19. (10.1007/s43684-022-00038-y)
Chen, H. et al., 2022. Safe distance prediction for braking control of bridge cranes considering anti-swing. International Journal of Intelligent Systems 37 (8), pp.4845-4863. (10.1002/int.22743)
Chen, J. et al., 2022. Harmonic suppression of charging station based on harmonic superposition. Presented at: The 16th Annual Conference of China Electrotechnical Society and China Electrotechnical Society´s 40th Anniversary Conference (ACCES2021) Beijing, China 24-26 September 2021. Published in: Liang, X. et al., The proceedings of the 16th Annual Conference of China Electrotechnical Society. Vol. 2.Lecture Notes in Electrical Engineering Singapore: Springer. , pp.1216-1223. (10.1007/978-981-19-1870-4_128)
Chen, J. 2022. Active control of medium-voltage cascaded three-level neutral-point-clamped converters. PhD Thesis , Cardiff University.
Chen, J. et al. 2022. Analysis and mitigation of DC voltage imbalance for medium-voltage cascaded three-level neutral-point-clamped converters. IEEE Transactions on Power Electronics 37 (4), pp.4320-4336. (10.1109/TPEL.2021.3129877)
Chen, J. et al. 2022. Demonstration of converter control Interactions in MMC-HVDC systems. Electronics 11 (2) 175. (10.3390/electronics11020175)
Chen, L. L. et al., 2022. Bi-material topology optimization for fully coupled structural-acoustic systems with isogeometric FEM-BEM. Engineering Analysis with Boundary Elements 135 , pp.182-195. (10.1016/j.enganabound.2021.11.005)
Chen, L. L. et al., 2022. Multi-frequency acoustic topology optimization of sound-absorption materials with isogeometric boundary element methods accelerated by frequency-decoupling and model order reduction techniques. Computer Methods in Applied Mechanics and Engineering 395 114997. (10.1016/j.cma.2022.114997)
Chen, L. et al., 2022. A sample-efficient deep learning method for multivariate uncertainty qualification of acoustic-vibration interaction problems. Computer Methods in Applied Mechanics and Engineering 393 114784. (10.1016/j.cma.2022.114784)
Chen, M. et al. 2022. Modelling anisotropic adsorption-induced coal swelling and stress dependent anisotropic permeability. International Journal of Rock Mechanics and Mining Sciences 153 105107. (10.1016/j.ijrmms.2022.105107)
Chen, M. , Masum, S. and Thomas, H. 2022. 3D hybrid coupled dual continuum and discrete fracture model for simulation of CO2 injection into stimulated coal reservoirs with parallel implementation. International Journal of Coal Geology 262 104103. (10.1016/j.coal.2022.104103)
Chen, Q. et al. 2022. Optimal operation of compressors in an integrated gas and electricity system-an enhanced MISOCP method. IEEE Access 10 , pp.131489-131497. (10.1109/ACCESS.2022.3227859)
Chen, W. , Yang, B. and Liu, Y. 2022. An integrated QFD and FMEA approach to identify risky components of products. Advanced Engineering Informatics 54 101808. (10.1016/j.aei.2022.101808)
Chen, X. , Nie, G. and Wu, Z. 2022. Global buckling and wrinkling of variable angle tow composite sandwich plates by a modified extended high-order sandwich plate theory. Composite Structures 292 115639. (10.1016/j.compstruct.2022.115639)
Chen, X. , Nie, G. and Wu, Z. 2022. Non-uniform torsion analysis of functionally graded beams with solid or thin-walled section using hierarchical Legendre expansion functions. Mechanics of Advanced Materials and Structures 29 (14), pp.2074-2097. (10.1080/15376494.2020.1851828)
Chen, Y. et al., 2022. A data-driven approach design for carbon emission prediction of machining. Presented at: International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC-CIE 2022) St. Louis, MO, USA 14-17 August 2022. 42nd Computers and Information in Engineering Conference (CIE). Vol. 2.(10.1115/DETC2022-90465)
Chen, Z. 2022. Data mining for fault diagnosis in steel making process under industry 4.0. PhD Thesis , Cardiff University.
Chen, Z. 2022. Quasicrystalline-generated phononic crystals for advanced engineering applications. PhD Thesis , Cardiff University.
Chen, Z. , Morini, L. and Gei, M. 2022. On the adoption of canonical quasi-crystalline laminates to achieve pure negative refraction of elastic waves. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 380 (2237) 20210401. (10.1098/rsta.2021.0401)
Cheng, D. et al., 2022. Additive manufacturing of lithium aluminosilicate glass-ceramic/metal 3D electronic components via multiple material laser powder bed fusion. Additive Manufacturing 49 102481. (10.1016/j.addma.2021.102481)
Cheng, M. et al., 2022. A convolutional neural network with equal-resolution enhancement and gradual attention of features for tiny target detection. Presented at: IEEE 18th International Conference on Automation Science and Engineering (CASE 2022) Mexico City, Mexico 20-24 August 2022. 2022 IEEE 18th International Conference on Automation Science and Engineering (CASE). IEEE(10.1109/CASE49997.2022.9926425)
Chiheb, S. et al., 2022. On the contribution of A PV generation in Adrar's isolated power system. Presented at: 2nd International Conference on Advanced Electrical Engineering Constantine, Algeria 29-31 October 2022. Proceedings of 2nd International Conference on Advanced Electrical Engineering (ICAEE). IEEE. (10.1109/ICAEE53772.2022.9962025)
Chng, L. et al., 2022. On the combined use of Vortex Generators and Gurney Flaps for turbine airfoils. Journal of Physics: Conference Series 2265 (3) 032040. (10.1088/1742-6596/2265/3/032040)
Choi, H. et al. 2022. Cervical tissue hydration level monitoring by a resonant microwave coaxial probe. Sensors 22 (23) 9527. (10.3390/s22239527)
Chou, H. , de Avila, A. M. H. and Bray, M. 2022. Evaluating the Atibaia river hydrology using JULES6.1. Geoscientific Model Development 15 (13), pp.5233-5240. (10.5194/gmd-15-5233-2022)
Chou, H. et al. 2022. Parameterizing the JULES land surface model for different land covers in the tropical Andes. Hydrological Sciences Journal 67 (10)(10.1080/02626667.2022.2094709)
Chu, A. M. et al., 2022. A novel mathematical approach for finite element formulation of flexible robot dynamics. Mechanics Based Design of Structures and Machines 50 (11), pp.3747-3767. (10.1080/15397734.2020.1820874)
Chu, S. 2022. Simultaneous sizing, layout and topology optimization for buckling and postbuckling of stiffened panels. PhD Thesis , Cardiff University.
Cimarelli, A. et al., 2022. Structure of turbulence in temporal planar jets. Physics of Fluids 34 (4) 045109. (10.1063/5.0085091)
Colqui, J. S. L. et al., 2022. Transient analysis on multiphase transmission line above lossy ground combining vector fitting technique in ATP tool. IEEE Access 10 , pp.86204-86214. (10.1109/ACCESS.2022.3198677)
Costanzo, F. et al., 2022. A GaN MMIC stacked doherty power amplifier for space applications. Presented at: IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR) Las Vegas, NV, USA 16-19 January 2022. Proceedings of Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR). IEEE. , pp.29-31. (10.1109/PAWR53092.2022.9719789)
Cripps, S. C. 2022. Moving goalposts [microwave bytes]. IEEE Microwave Magazine 23 (5), pp.20-25. (10.1109/MMM.2022.3148151)
Cripps, S. C. 2022. Phasing out [microwave bytes]. IEEE Microwave Magazine 23 (8), pp.18-22. (10.1109/MMM.2022.3173068)
Cripps, S. C. 2022. Still a-masing [microwave bytes]. IEEE Microwave Magazine 24 (1), pp.16-20. (10.1109/MMM.2022.3203943)
Cripps, S. C. 2022. Tuning up [microwave bytes]. IEEE Microwave Magazine 23 (2), pp.16-54. (10.1109/MMM.2021.3125471)
Cui, C. et al., 2022. New analytical solution to predict the vertical impedance of a large-diameter pipe pile in soil considering wave propagation in visco-elastic continuum. Journal of Earthquake and Tsunami 16 (02) 2140002. (10.1142/S1793431121400029)
Cui, L. et al. 2022. Investigation on gas migration behaviours in saturated compacted bentonite under rigid boundary conditions. Acta Geotechnica 17 , pp.2517-2531. (10.1007/s11440-021-01424-1)
Cui, T. , Kulasegaram, S. and Li, H. 2022. Predicting fresh and hardened properties of self-compacting concrete containing fly ash by artificial neural network model. Presented at: Concrete Solutions 2022:8th International Conference on Concrete Repair, Durability, Service Life and Concrete Technology Leeds, UK 11-13 July 2022. MATEC Web of Conferences: Concrete Solutions 2022 – 8th International Conference on Concrete Repair, Durability & Technology. EDP Sciences. , pp.05005. (10.1051/matecconf/202236105005)
Dangel, C. et al., 2022. Two-photon interference of single photons from dissimilar sources. Physical Review Applied 18 (5) 054005. (10.1103/PhysRevApplied.18.054005)
Davies, A. et al., 2022. The pattern and long term follow up of covid-19 related abnormal liver blood tests. International Journal of Scientific Research 11 (4), pp.1-4. (10.36106/ijsr/6020892)
Davies, K. J. M. et al. 2022. The effect of maternal smoking and alcohol consumption on lip morphology. Journal of Orthodontics 49 (4), pp.403-411. (10.1177/14653125221094337)
Davies-Smith, C. A. et al. 2022. A study of the volatilisation of coal sulphur during combustion under conditions similar to a blast furnace raceway. Fuel 330 125552. (10.1016/j.fuel.2022.125552)
Davies-Smith, C. et al. 2022. An enhanced active load-pull algorithm for faster convergence. Presented at: European Microwave Week 2021 London, UK 2-7 April 2022. European Microwave Week 2021 "United in Microwaves" Conference Proceedings. IEEE. , pp.354. (10.23919/EuMC50147.2022.9784250)
De La Cruz-Loredo, I. , Ugalde-Loo, C. E. and Abeysekera, M. 2022. Dynamic simulation and control of the heat supply system of a civic building with thermal energy storage units. IET Generation, Transmission and Distribution 16 (14), pp.2864-2877. (10.1049/gtd2.12453)
Deakin, M. et al., 2022. Hybrid open points: an efficient tool for increasing network capacity in distribution systems. IEEE Transactions on Power Delivery 37 (2), pp.1340-1343. (10.1109/TPWRD.2021.3136772)
Deakin, M. et al., 2022. Design and operation of hybrid multi-terminal soft open points using feeder selector switches for flexible distribution system interconnection. Electric Power Systems Research 212 108516. (10.1016/j.epsr.2022.108516)
Debnath, K. B. and Mourshed, M. 2022. Why is Bangladesh’s electricity generation heading towards a GHG emissions-intensive future?. Carbon Management 13 (1), pp.216-237. (10.1080/17583004.2022.2068454)
Dehaghani, E. S. , Cipcigan, L. and Williamson, S. S. 2022. The role of electric vehicles in smart grids. In: Zambroni de Souza, A. C. and Venkatesh, B. eds. Planning and Operation of Active Distribution Networks. Vol. 826, Lecture Notes in Electrical Engineering Springer Science Business Media. , pp.123-151. (10.1007/978-3-030-90812-6_5)
Del Anger-Hernandez, M. and Bakthavatchaalam, V. 2022. Circular economy as a strategy in European automotive industries to achieve sustainable development: A qualitative study. Project Report.[Online].United Nations - STI. Available at: https://sdgs.un.org/sites/default/files/2022-05/1.1.10-66-Del%20Angel%20-%20Circular%20Economy%20EU%20Automotive.pdf.
Demchenko, I. , Melikhov, Y. and Pellegrin, E. 2022. Preface: The European Materials Research Society (EMRS) Fall Meeting 2021 Symposium P was held on 20?23 September 2021 in Warsaw, Poland. Materials Science in Semiconductor Processing 150 106910. (10.1016/j.mssp.2022.106910)
Dharavat, N. et al., 2022. Optimal allocation of renewable distributed generators and electric vehicles in a distribution system using the political optimization algorithm. Energies 15 (18), pp.1-25. 6698. (10.3390/en15186698)
Dimitriou, P. et al. 2022. Active content release from synthetic cell interior towards a novel drug delivery method. Presented at: MicroTAS 2022 Hangzhou, China 23-27 October 2022.
Dimitriou, P. et al. 2022. Droplet incubator: a new droplet-based model to investigate living cell-synthetic cell interactions. Presented at: MicroTAS 2022 Hangzhou, China 23-27 October 2022.
Dissanayake, R. et al., 2022. Optimizing pv-hosting capacity with the integrated employment of dynamic line rating and voltage regulation. Energies 15 (22) 8537. (10.3390/en15228537)
Dong, B. et al., 2022. A non-intrusive probabilistic multi-energy flow calculation method and its application in operation risk analysis of integrated energy systems. Sustainable Energy Technologies and Assessments 54 102834. (10.1016/j.seta.2022.102834)
Dong, B. et al., 2022. Integrated modeling of 2D urban surface and 1D sewer hydrodynamic processes and flood risk assessment of people and vehicles. Science of the Total Environment 827 154098. (10.1016/j.scitotenv.2022.154098)
Dong, Z. et al., 2022. Development of an autonomous mobile robot for passive welfare object transportation. Presented at: The Proceedings of JSME Annual Conference on Robotics and Mechatronics (Robomec) Japan 01-04 June 2022. Vol. 2022.Vol. 0. , pp.2A2-B06. (10.1299/jsmermd.2022.2A2-B06)
Drahota, A. et al., 2022. Shock-absorbing flooring for fall-related injury prevention in older adults and staff in hospitals and care homes: the SAFEST systematic review. Health Technology Assessment 25 (5)(10.3310/ZOWL2323)
Drahota, A. et al., 2022. The SAFEST review: a mixed methods systematic review of shock-absorbing flooring for fall-related injury prevention. BMC Geriatrics 22 32. (10.1186/s12877-021-02670-4)
Duan, S. et al., 2022. A grid inductance detection method based on the oscillation characteristic of inverter terminal voltage. IEEE Transactions on Power Electronics 37 (6), pp.7209-7217. (10.1109/TPEL.2021.3139886)
Duque-Redondo, E. , Masoero, E. and Manzano, H. 2022. Nanoscale shear cohesion between cement hydrates: The role of water diffusivity under structural and electrostatic confinement. Cement and Concrete Research 154 106716. (10.1016/j.cemconres.2022.106716)
Eaton, M. et al. 2022. Monitoring the drilling process of carbon fibre laminates using acoustic emission. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (10.1177/09544054221124474)
Edwards, D. et al. 2022. Technologies used to facilitate remote rehabilitation of adults with deconditioning, musculoskeletal conditions, stroke, or traumatic brain injury: an umbrella review. JBI Evidence Synthesis 20 (8), pp.1927-1968. (10.11124/JBIES-21-00241)
Egbe, U. et al., 2022. A case-based reasoning based framework for developing computer aided remanufacturing process planning systems. Presented at: International Conference on Reliable Systems Engineering (ICoRSE) - 2022 8-9 September 2022. Published in: Cioboată, D. ed. International Conference on Reliable Systems Engineering (ICoRSE) - 2022. ICoRSE 2022. Vol. 534.Springer. , pp.305-311. (10.1007/978-3-031-15944-2_28)
El Fajri, O. et al., 2022. Numerical study of the effect of tip-speed ratio on hydrokinetic turbine wake recovery. Renewable Energy 182 , pp.725-750. (10.1016/j.renene.2021.10.030)
Elfekky, M. et al. 2022. Causes of anterior cruciate ligament reconstruction failure: A meta-analysis. Journal of Musculoskeletal Surgery and Research 6 , pp.193-199. (10.25259/JMSR_72_2022)
Elgbaily, M. , Anayi, F. and Alshbib, M. M. 2022. A combined control scheme of direct torque control and field-oriented control algorithms for three-phase induction motor: experimental validation. Mathematics 10 (20) 3842. (10.3390/math10203842)
Elgbaily, M. , Anayi, F. and Elgamli, E. 2022. Design of a DC to DC converter for a residential grid connected solar energy system. Presented at: 1st International Electronic Conference on Processes: Processes System Innovation Online 17–31 May 2022. Engineering Proceedings. Vol. 19(1)6. MDPI. (10.3390/ECP2022-12620)
Elgbaily, M. , Anayi, F. and Packianather, M. 2022. Genetic and particle swarm optimization algorithms based direct torque control for torque ripple attenuation of induction motor. Materials Today: Proceedings 67 (4), pp.577-590. (10.1016/j.matpr.2022.08.293)
Elgbaily, M. , Anayi, F. and Packianather, M. 2022. Performance improvement based torque ripple minimization for direct torque control drive fed induction motor using fuzzy logic control. Presented at: 3rd International Conference on Control, Instrumentation and Mechatronics Engineering, CIM 2022 Online 30-31 Mar 2022. Published in: Wahab, N. A. and Zaharuddin, M. eds. Instrumentation and Mechatronics: Theory and Practice [Conference Proceedings]. Vol. 921.Lecture Notes in Electrical Engineering Springer Science Business Media. , pp.416–428. (10.1007/978-981-19-3923-5_36)
ElHawary, O. and Bakthavatchaalam, V. 2022. What can be done about the discarded face mask pandemic? An innovative engineering solution. Project Report.[Online].United Nations - STI. Available at: https://sdgs.un.org/sites/default/files/2022-05/3.2.1-65-Omar%20-recycling%20face%20masks.pdf.
Elnour, M. et al., 2022. Performance and energy optimization of building automation and management systems: Towards smart sustainable carbon-neutral sports facilities. Renewable and Sustainable Energy Reviews 162 112401. (10.1016/j.rser.2022.112401)
Elnour, M. et al., 2022. Neural network-based model predictive control system for optimizing building automation and management systems of sports facilities. Applied Energy 318 , pp.119-153. (10.1016/j.apenergy.2022.119153)
Escudero Ornelas, A. et al. 2022. On the performance evaluation of microtextured surfaces using computational fluid dynamics: a comparative study. Presented at: World Congress on Micro and Nano Manufacturing - WCMNM 2022 Leuven, Belgium 19-22 September 2022.
Evans, J. et al., 2022. Data sharing across osteoarthritis research groups and disciplines: Opportunities and challenges. Osteoarthritis and Cartilage Open 4 (1) 100236. (10.1016/j.ocarto.2022.100236)
Eze, M. C. et al. 2022. Improving the efficiency and stability of in-air fabricated perovskite solar cells using the mixed antisolvent of methyl acetate and chloroform. Organic Electronics 107 106552. (10.1016/j.orgel.2022.106552)
Fajardo, J. M. et al., 2022. FRobs_RL: A flexible robotics reinforcement learning library. Presented at: IEEE International Conference on Automation Science and Engineering (CASE) Mexico City 20 - 24 August 2022. 2022 IEEE 18th International Conference on Automation Science and Engineering (CASE). IEEE(10.1109/CASE49997.2022.9926586)
Falconer, R. A. 2022. Water security: why we need global solutions. Engineering 16 , pp.13-15. (10.1016/j.eng.2021.10.009)
Fang, X. et al., 2022. An auxiliary circuit enhancing the DC fault clearing capability of hybrid MMCs with low proportion of FB-SMs. IEEE Transactions on Power Electronics 37 (10), pp.11491-11496. (10.1109/TPEL.2022.3171552)
Fang, X. et al., 2022. An energy absorbing method for hybrid mmcs to avoid full-bridge submodule overvoltage during DC fault blocking. IEEE Transactions on Power Electronics 37 (5), pp.4947-4951. (10.1109/TPEL.2021.3130766)
Farhat, A. K. M. , Morini, L. and Gei, M. 2022. Silver-mean canonical quasicrystalline-generated phononic waveguides. Journal of Sound and Vibration 523 116679. (10.1016/j.jsv.2021.116679)
Fawwaz Aalrebei, O. et al., 2022. Ammonia-hydrogen-air gas turbine cycle and control analyses. International Journal of Hydrogen Energy 47 (13), pp.8603-8620. (10.1016/j.ijhydene.2021.12.190)
Fawwaz Alrebei, O. et al. 2022. Planar laser-induced fluorescence and chemiluminescence analyses of CO2-argon-steam oxyfuel (CARSOXY) combustion. Energies 15 (1) 263. (10.3390/en15010263)
Federico, P. et al., 2022. Implementation of second earthwire on l6 400 kv transmission line. Presented at: 2022 57th International Universities Power Engineering Conference (UPEC) Istanbul, Turkey 30 Aug 22 - 02 Sept 22. 2022 57th International Universities Power Engineering Conference (UPEC). IEEE. (10.1109/UPEC55022.2022.9917671)
Feng, S. et al. 2022. Predicting laser powder bed fusion defects through in-process monitoring data and machine learning. Materials & Design 222 111115. (10.1016/j.matdes.2022.111115)
Fnais, A. et al. 2022. The application of life cycle assessment in buildings: challenges, and directions for future research. International Journal of Life Cycle Assessment 27 , pp.627-654. (10.1007/s11367-022-02058-5)
Follett, E. and Hankin, B. 2022. Investigation of effect of logjam series for varying channel and barrier physical properties using a sparse input data 1D network model. Environmental Modelling and Software 158 105543. (10.1016/j.envsoft.2022.105543)
Foster, I. 2022. Machine learning applications for personalised automated radiotherapy planning. PhD Thesis , Cardiff University.
Freeman, B. L. 2022. A multi-point constraint unfitted finite element method. Advanced Modeling and Simulation in Engineering Sciences 9 19. (10.1186/s40323-022-00232-w)
Fu, H. et al., 2022. Asynchronous multi-rate method of real-time simulation for active distribution networks. IET Renewable Power Generation (10.1049/rpg2.12500)
Fu, H. and Liu, Y. 2022. A deep learning-based approach for electrical equipment remaining useful life prediction. Autonomous Intelligent Systems 2 16. (10.1007/s43684-022-00034-2)
Gallichan, D. and Engström, M. 2022. Image-space navigators. In: van der Kouwe, A. J. and Andre, J. B. eds. Motion Correction in MR Correction of Position, Motion, and Dynamic Field Changes. Vol. 6, Advances in Magnetic Resonance Technology and Applications , pp.225-236. (10.1016/B978-0-12-824460-9.00015-7)
Gan, W. et al. 2022. A low-carbon planning method for joint regional-district multi-energy systems: From the perspective of privacy protection. Applied Energy 311 118595. (10.1016/j.apenergy.2022.118595)
Gang, A. et al., 2022. Performance analysis of a coast - OWC wave energy converter integrated system. Applied Energy 311 118605. (10.1016/j.apenergy.2022.118605)
Gao, C. et al., 2022. Accelerated electromagnetic transient (EMT) equivalent model of solid-state transformer. IEEE Journal of Emerging and Selected Topics in Power Electronics 10 (4), pp.3721-3732. (10.1109/JESTPE.2021.3094278)
Gao, K. et al. 2022. Robust topology optimization of structures under uncertain propagation of imprecise stochastic-based uncertain field. Thin-Walled Structures 175 109238. (10.1016/j.tws.2022.109238)
Gao, S. , Ren, G. and Li, H. 2022. Knowledge management in construction health and safety based on ontology modeling. Applied Sciences 12 (17) e8574. (10.3390/app12178574)
Gao, W. and Kavazanjian, E. 2022. A constitutive model for municipal solid waste considering mechanical creep and biodegradation-induced compression. Acta Geotechnica 17 (1), pp.37–63. (10.1007/s11440-021-01202-z)
Gao, W. , Kavazanjian, E. and Wu, X. 2022. Numerical study of strain development in high-density polyethylene geomembrane liner system in landfills using a new constitutive model for municipal solid waste. Geotextiles and Geomembranes 50 (2), pp.216-230. (10.1016/j.geotexmem.2021.09.007)
Gao, W. et al. 2022. Improving computational efficiency of numerical modelling of horizontal ground source heat pump systems for accommodating complex and realistic atmospheric processes. Geothermics 106 102568. (10.1016/j.geothermics.2022.102568)
Gao, W. et al. 2022. Estimation and prediction of shallow ground source heat resources subjected to complex soil and atmospheric boundary conditions. Renewable Energy 197 , pp.978-994. (10.1016/j.renene.2022.07.148)
Gao, W. , Zagorščak, R. and Thomas, H. R. 2022. Insights into ground response during underground coal gasification through thermo-mechanical modeling. International Journal for Numerical and Analytical Methods in Geomechanics 46 (1), pp.3-22. (10.1002/nag.3287)
Gao, W. , Zagorscak, R. and Thomas, H. R. 2022. Numerical study of ground deformation during underground coal gasification through coupled flow-geomechanical modelling. Fuel 315 122833. (10.1016/j.fuel.2021.122833)
Gao, W. et al. 2022. Simulation of underground coal gasification based on a coupled thermal-hydraulic-chemical model. Combustion Theory and Modelling 26 (1), pp.110-134. (10.1080/13647830.2021.1992507)
Gao, Y. , Li, H. and Xiong, G. 2022. An efficient and resilient digital-twin communication framework for smart bridge structural survey and maintenance. Presented at: 29th EG-ICE International Workshop on Intelligent Computing in Engineering 2022 Aarhus, Denmark 06-08 July 2022.
Gao, Z. et al. 2022. Advances in biological techniques for sustainable lignocellulosic waste utilization in biogas production. Renewable and Sustainable Energy Reviews 170 112995. (10.1016/j.rser.2022.112995)
Garada, A. et al. 2022. Optimal configuration using renewable technologies for overcome blackouts in Libya power system: Al-Marj city case study. Presented at: 2022 57th International Universities Power Engineering Conference 30 August 2022 - 02 September 2022. (10.1109/UPEC55022.2022.9917984)
Garbelim Pascoalato, T. F. et al., 2022. A comparison of frequency-dependent soil models: electromagnetic transient analysis of overhead transmission lines using modal decomposition. Energies 15 (5) 1687. (10.3390/en15051687)
Ghazwan, A. et al. 2022. Knee osteoarthritis alters peri-articular knee muscle strategies during gait. PLoS ONE 17 (1) e0262798. (10.1371/journal.pone.0262798)
Ghoroghi, A. et al. 2022. Advances in application of machine learning to life cycle assessment: a literature review. International Journal of Life Cycle Assessment 27 , pp.433-456. (10.1007/s11367-022-02030-3)
Ghoroghi, A. , Rezgui, Y. and Wallace, R. 2022. Impact of ventilation and avoidance measures on SARS-CoV-2 risk of infection in public indoor environments. Science of the Total Environment 838 (4) 156518. (10.1016/j.scitotenv.2022.156518)
Ghosh, S. , Rajan, L. and Varghese, A. 2022. Junctionfree gate stacked vertical TFET hydrogen sensor at room temperature. IEEE Transactions on Nanotechnology 21 , pp.655-662. (10.1109/TNANO.2022.3217652)
Giakoumaki, A. N. et al., 2022. Quantum technologies in diamond enabled by laser processing. Applied Physics Letters 120 (2) 020502. (10.1063/5.0080348)
Giasin, K. et al., 2022. Effect of fibre orientation on impact damage resistance of S2/FM94 glass fibre composites for aerospace applications: an experimental evaluation and numerical validation. Polymers 14 (1) 95. (10.3390/polym14010095)
Goda, K. et al., 2022. Scenario-based earthquake risk assessment for central-southern Malawi: The case of the Bilila-Mtakataka Fault. International Journal of Disaster Risk Reduction 67 102655. (10.1016/j.ijdrr.2021.102655)
Goetz, A. et al., 2022. Addressing materials' microstructure diversity using transfer learning. npj Computational Materials 8 27. (10.1038/s41524-022-00703-z)
Goud, B. S. et al., 2022. PV/WT integrated system using the Gray Wolf Optimization Technique for power quality improvement. Frontiers in Energy Research 10 957971. (10.3389/fenrg.2022.957971)
Grigg, S. , Pullin, R. and Featherston, C. 2022. Acoustic emission source location in complex aircraft structures using three closely spaced sensors. Mechanical Systems and Signal Processing 164 108256. (10.1016/j.ymssp.2021.108256)
Grigg, S. et al. 2022. Wireless acoustic emission systems. In: Grosse, C. U. et al., Acoustic Emission Testing: Basics for Research – Applications in Engineering. Springer Tracts in Civil Engineering Springer, Cham. , pp.711-729. (10.1007/978-3-030-67936-1_23)
Gugelmin-Almeida, D. et al., 2022. A novel retraining strategy of chest compression skills for infant CPR results in high skill retention for longer. European Journal of Pediatrics 181 , pp.4101-4109. (10.1007/s00431-022-04625-2)
Guillena, E. et al., 2022. Reconfigurable DPD based on ANNs for wideband load modulated balanced amplifiers under dynamic operation from 1.8 to 2.4 GHz. IEEE Transactions on Microwave Theory and Techniques 70 (1), pp.453-465.
Gundimeda, A. et al., 2022. Investigation of wurtzite formation in MOVPE-grown zincblende GaN epilayers on AlxGa1−xN nucleation layers. Journal of Applied Physics 131 (11) 115703. (10.1063/5.0077186)
Gundimeda, A. et al., 2022. Influence of AlxGa1-xN nucleation layers on MOVPE-grown zincblende GaN epilayers on 3C-SiC/Si(001). Journal of Physics D: Applied Physics 55 (7) 175110. (10.1088/1361-6463/ac4c58)
Guo, B. 2022. Hydro-environmental modelling and interaction of tidal lagoons around the UK coast. PhD Thesis , Cardiff University.
Guo, X. , Jiang, Y. and Liu, Y. 2022. Conceptual design for innovation: a knowledge-based approach. In: Kyratsis, P. , Efkolidis, N. and Davim, J. P. eds. Advances in Product Design Engineering. Springer. , pp.179-198. (10.1007/978-3-030-98124-2_8)
Guo, Y. et al., 2022. A nonunit two-stage protection scheme for DC transmission lines in high-voltage DC grids. International Journal of Electrical Power & Energy Systems 146 108742. (10.1016/j.ijepes.2022.108742)
Guteša Božo, M. et al., 2022. A novel trigeneration gas turbine cycle powered by humidified ammonia/hydrogen with ammonia refrigeration. Presented at: 1st Symposium on Ammonia Energy 1 - 2 September 2022.
Hadden, J. P. et al. 2022. Design of free-space couplers for suspended triangular nano-beam waveguides. Journal of Physics D: Applied Physics 55 (47) 474002. (10.1088/1361-6463/ac941e)
Hamilton, R. I. , Garden, C. L. and Brown, S. J. 2022. Immediate effect of a spinal mobilisation intervention on muscle stiffness, tone and elasticity in subjects with lower back pain - A randomized cross-over trial. Journal of Bodywork and Movement Therapies 29 , pp.60-67. (10.1016/j.jbmt.2021.09.032)
Hamilton, R. I. , Williams, J. and Holt, C. 2022. Biomechanics beyond the lab: remote technology for osteoarthritis patient data-a scoping review. Frontiers in Rehabilitation Sciences 3 1005000. (10.3389/fresc.2022.1005000)
Hanousek, N. and Ahmadian, R. 2022. Assessing the sensitivity of tidal range energy models to water level accuracy. Presented at: IAHR 39th World Congress Granada, Spain 19-24 June 2022. Published in: Ortega-Sánchez, M. ed. Proceedings: 39th IAHR World Congress. IAHR. , pp.4688-4697. (10.3850/IAHR-39WC252171192022369)
Harper, J. 2022. An experimental study of the nvPM emissions produced by alternative aviation fuels in a newly-developed RQL research combustor. PhD Thesis , Cardiff University.
Harper, J. et al. 2022. Influence of alternative fuel properties and combustor operating conditions on the nvPM and gaseous emissions produced by a small-scale RQL combustor. Fuel 315 123045. (10.1016/j.fuel.2021.123045)
Harvey, S. et al., 2022. An inertial mechanism behind dynamic station holding by fish swinging in a vortex street. Scientific Reports 12 12660. (10.1038/s41598-022-16181-8)
Hedir, A. et al., 2022. Correlation between structural changes and dielectric behavior of UV-Aged LDPE. Presented at: 2nd International Conference on Advanced Electrical Engineering Constantine, Algeria 29-31 October 2022. Proceedings of 2nd International Conference on Advanced Electrical Engineering (ICAEE). IEEE. (10.1109/ICAEE53772.2022.9962003)
Hedir, A. et al., 2022. Quantifying time-dependent structural and mechanical properties of UV-aged LDPE power cables insulations. Turkish Journal of Chemistry 46 (4), pp.956-967. 3. (10.55730/1300-0527.3407)
Hefford, S. and Porch, A. 2022. Surface resistance of metallised 3D-printed plastic surfaces measured in the C-band using a dielectric resonator. Presented at: 2022 Asia-Pacific Microwave Conference (APMC) Yokohama, Japan 29 November 2022 - 02 December 2022. Proceedings of 2022 Asia-Pacific Microwave Conference (APMC). IEEE. , pp.142-144. (10.23919/APMC55665.2022.9999909)
Hejazi, S. , Packianather, M. and Liu, Y. 2022. Novel preprocessing of multimodal condition monitoring data for classifying induction motor faults using deep learning methods. Presented at: IEEE 2nd International Symposium on Sustainable Energy, Signal Processing and Cyber Security (iSSSC) Gunupur, Odisha, India 15-17 December 2022. Proceedings of 2nd International Symposium on Sustainable Energy, Signal Processing and Cyber Security. IEEE. , pp.1-6. (10.1109/iSSSC56467.2022.10051321)
Hertenberg, K. et al., 2022. Evaluation of an avatar robot with a physically immersive telepresence. Presented at: 2021 IEEE International Conference on Robotics and Biomimetics, ROBIO 2021 Sanya, China 27-31 December 2021. 2021 IEEE International Conference on Robotics and Biomimetics, ROBIO 2021. IEEE. , pp.99-104. (10.1109/ROBIO54168.2021.9739326)
Heydarpour, Y. , Malekzadeh, P. and Zhu, H. 2022. Three-dimensional response of multilayer FG-GPLRC spherical panels under blast loading. International Journal of Structural Stability and Dynamics 22 (11) 2250111. (10.1142/S0219455422501115)
Hill, M. J. et al., 2022. Organic-matter decomposition in urban stream and pond habitats. Ecological Indicators 142 109232. (10.1016/j.ecolind.2022.109232)
Himeur, Y. et al., 2022. Next-generation energy systems for sustainable smart cities: Roles of transfer learning. Sustainable Cities and Society 85 104059. (10.1016/j.scs.2022.104059)
Hodorog, A. , Petri, I. and Rezgui, Y. 2022. Machine learning and Natural Language Processing of social media data for event detection in smart cities. Sustainable Cities and Society 85 104026. (10.1016/j.scs.2022.104026)
Homaee, O. et al., 2022. Conceptual design of distribution management system software. Presented at: International Conference on Environment and Electrical Engineering (EEEIC) 28 June 2022 - 01 July 2022. 2022 IEEE International Conference on Environment and Electrical Engineering and 2022 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe). IEEE. (10.1109/EEEIC/ICPSEurope54979.2022.9854752)
Hu, H. et al., 2022. A conceptual design specification based on user aesthetic information analysis and product functional reasoning. Machines 10 (10) 868. (10.3390/machines10100868)
Hu, H. et al., 2022. A knowledge-based approach towards representation and archiving of aesthetic information for product conceptual design. Journal of Computing and Information Science in Engineering 22 (4) 041011. (10.1115/1.4053674)
Hu, H. et al., 2022. A quantitative aesthetic measurement method for product appearance design. Advanced Engineering Informatics 53 101644. (10.1016/j.aei.2022.101644)
Hu, H. , Liu, Y. and Lu, W. F. 2022. Establishing product appearance specifications with the identification of user aesthetic needs in product conceptual design. In: Kyratsis, P. , Efkolidis, N. and Davim, J. P. eds. Advances in Product Design Engineering. Springer. , pp.199-217. (10.1007/978-3-030-98124-2_9)
Hu, Q. et al., 2022. Surface flashover induced by metal contaminants adhered to tri-post epoxy insulators under superimposed direct and lightning impulse voltages. Polymers 14 (7) 1374. (10.3390/polym14071374)
Hua, W. et al., 2022. Applications of blockchain and artificial intelligence technologies for enabling prosumers in smart grids: A review. Renewable and Sustainable Energy Reviews 161 112308. (10.1016/j.rser.2022.112308)
Hua, W. et al. 2022. Data-driven prosumer-centric energy scheduling using convolutional neural networks. Applied Energy 308 118361. (10.1016/j.apenergy.2021.118361)
Hua, W. et al., 2022. Blockchain technologies empowering peer‐to‐peer trading in multi‐energy systems: From advanced technologies towards applications. IET Smart Grid 5 (4), pp.219-222. (10.1049/stg2.12081)
Huang, G. et al., 2022. Dynamic tracing of fecal bacteria processes from a river basin to an estuary using a 2D/3D model. River 1 (2), pp.149-161. (10.1002/rvr2.27)
Huang, L. et al., 2022. Impact of storm surge on the Yellow River Delta: Simulation and analysis. Water 14 (21) 3439. (10.3390/w14213439)
Hunt-Pain, G. 2022. Application of machine learning to gearbox condition monitoring with rate of change of torque sensors. PhD Thesis , Cardiff University.
Hyun, J. et al., 2022. On development of an accessible and non-intrusive level-set topology optimization framework via the discrete adjoint method. Presented at: AIAA SCITECH 2022 Forum Virtual 03-07 January 2022. AIAA SCITECH 2022 Forum. Aerospace Reseach Central. (10.2514/6.2022-2548)
Ibrahim, A. , Anayi, F. and Packianather, M. 2022. Detection of three-phase induction motor faults using deep network-based transfer learning techniques. Presented at: IM IEEE 2nd International Maghreb Meeting of the Conference on Sciences and Techniques of Automatic Control and Computer Engineering (MI-STA) 23-25 May 2022. 2022 IEEE 2nd International Maghreb Meeting of the Conference on Sciences and Techniques of Automatic Control and Computer Engineering (MI-STA). IEEE. , pp.133-138. (10.1109/MI-STA54861.2022.9837619)
Ibrahim, A. et al. 2022. New hybrid invasive weed optimization and machine learning approach for fault detection. Energies 15 (4) 1488. (10.3390/en15041488)
Ibrahim, A. , Anayi, F. and Packianather, M. 2022. New machine learning model-based fault diagnosis of induction motors using thermal images. Presented at: 2nd International Conference on Advance Computing and Innovative Technologies in Engineering (ICACITE) Greater Noida, India 28-29 April 2022. Proceedings of 2nd International Conference on Advance Computing and Innovative Technologies in Engineering. IEEE. , pp.58-62. (10.1109/ICACITE53722.2022.9823832)
Ibrahim, A. , Anayi, F. and Packianather, M. 2022. New Transfer Learning Approach Based on a CNN for Fault Diagnosis. Presented at: 1st International Electronic Conference on Machines and Applications, 15–30 September 2022 Online 15-30 September 2022. The 1st International Electronic Conference on Machines and Applications. Vol. 16. MDPI. (10.3390/IECMA2022-12905)
Ibrahim, A. , Anayi, F. and Packianather, M. 2022. Novel deep network-based transfer learning approach for fault detection of three-phase induction motor. Presented at: 2nd International Conference on Advance Computing and Innovative Technologies in Engineering (ICACITE) Greater Noida, India 28-29 April 2022. Proceedings of 2nd International Conference on Advance Computing and Innovative Technologies in Engineering. IEEE. , pp.655-659. (10.1109/ICACITE53722.2022.9823821)
Incorvaja, D. et al., 2022. Circular economy and construction supply chains. Presented at: 2022 IEEE/ACM International Conference on Big Data Computing, Applications and Technologies (BDCAT) Vancouver, WA, USA 6-9 December 2022. Proceedings of 2022 IEEE/ACM International Conference on Big Data Computing, Applications and Technologies. IEEE. , pp.92-99. (10.1109/BDCAT56447.2022.00019)
Ioannidou, K. , Labbez, C. and Masoero, E. 2022. A review of coarse grained and mesoscale simulations of C–S–H. Cement and Concrete Research 159 106857. (10.1016/j.cemconres.2022.106857)
Izadi, M. et al., 2022. Analysis of applying fin for charging process of phase change material inside H-shaped thermal storage. International Communications in Heat and Mass Transfer 139 106421. (10.1016/j.icheatmasstransfer.2022.106421)
Jaber, A. , Altayef, E. and Abdul Samad, B. 2022. Partial discharge source calibration of radiated partial discharge signals. Presented at: 2nd International Conference on Advance Computing and Innovative Technologies in Engineering (ICACITE) Greater Noida, India 28-29 April 2022. Proceedings of 2nd International Conference on Advance Computing and Innovative Technologies in Engineering. IEEE. , pp.2448-2453. (10.1109/ICACITE53722.2022.9823551)
Jaiswal, A. et al., 2022. Design and implementation of energy reshaping based fuzzy logic control for optimal power extraction of PMSG wind energy converter. Frontiers in Energy Research 10 966975. (10.3389/fenrg.2022.966975)
Jakubiak, K. , Liang, J. and Cipcigan, L. 2022. Modelling of inductive wireless charging for electric vehicles. Presented at: 2022 IEEE 16th International Conference on Compatibility, Power Electronics, and Power Engineering (CPE-POWERENG) 29 June 2022 - 01 July 2022. 2022 IEEE 16th International Conference on Compatibility, Power Electronics, and Power Engineering (CPE-POWERENG). IEEE. (10.1109/CPE-POWERENG54966.2022.9880892)
James, J. C. 2022. Investigation of transient and safety issues in gas insulated systems. PhD Thesis , Cardiff University.
Jayatilaka, G. et al., 2022. Holistic interpretation of public scenes using computer vision and temporal graphs to identify social distancing violations. Applied Sciences 12 (17) e8428. (10.3390/app12178428)
Jefferson, A. D. and Freeman, B. L. 2022. A crack-opening-dependent numerical model for self-healing cementitious materials. International Journal of Solids and Structures 244-24 111601. (10.1016/j.ijsolstr.2022.111601)
Jha, V. and Krishnamurthy, B. 2022. Modeling the SEI layer formation and its growth in lithium-ion batteries (lib) during charge–discharge cycling. Ionics 28 (8), pp.3661-3670. (10.1007/s11581-022-04617-0)
Jha, V. and Krishnamurthy, B. 2022. Modeling the effect of acid attack on the capacity fading in lithium-ion batteries during cycling. Ionics 28 (5), pp.2247-2257. (10.1007/s11581-022-04457-y)
Jha, V. , Velidi, G. and Emani, S. 2022. Optimization of flame stabilization methods in the premixed microcombustion of hydrogen–air mixture. Heat Transfer 51 (6), pp.5896-5918. (10.1002/htj.22574)
Ji, H. et al., 2022. Fluvial sediment source to sink transfer at the Yellow River Delta: Quantifications, causes, and environmental impacts. Journal of Hydrology 608 127622. (10.1016/j.jhydrol.2022.127622)
Jia, W. et al., 2022. RS-Net: robust segmentation of green overlapped apples. Precision Agriculture 23 , pp.492-513. (10.1007/s11119-021-09846-3)
Jian, J. et al., 2022. Dlmp-based quantification and analysis method of operational flexibility in flexible distribution networks. IEEE Transactions on Sustainable Energy 13 (4), pp.2353-2369. (10.1109/TSTE.2022.3197175)
Jian, J. et al., 2022. Multi-stage supply restoration of active distribution networks with SOP integration. Sustainable Energy, Grids and Networks 29 100562. (10.1016/j.segan.2021.100562)
Jiang, X. et al. 2022. An overview of soft open points in electricity distribution networks. IEEE Transactions on Smart Grid 13 (3), pp.1899-1910. (10.1109/TSG.2022.3148599)
Jiang, Y. et al., 2022. Knowledge driven approach for smart bridge maintenance using big data mining. Automation in Construction 146 104673. (10.1016/j.autcon.2022.104673)
Jie, X. et al., 2022. Size-dependent microwave heating and catalytic activity of fine iron particles in the deep dehydrogenation of hexadecane. Chemistry of Materials 34 (10), pp.4682-4693. (10.1021/acs.chemmater.2c00630)
Jin, F. 2022. Chapter 20 - Sustainable utilization of slags. In: Tsang, D. and Wang, L. eds. Low Carbon Stabilization and Solidification of Hazardous Wastes. Elsevier. , pp.321-341. (10.1016/B978-0-12-824004-5.00016-5)
Jin, J. et al., 2022. Wind and photovoltaic power time series data aggregation method based on ensemble clustering and Markov chain. CSEE Journal of Power and Energy Systems 8 (3), pp.757 - 768. (10.17775/CSEEJPES.2020.03700)
Jin, X. , Li, P. and Borodich, F. M. 2022. Indentation tests of biological materials: Theoretical aspects. In: Borodich, F. M. and Jin, X. eds. Contact Problems for Soft, Biological and Bioinspired Materials. Vol. 15, Biologically-Inspired Systems Cham: , pp.181-198. (10.1007/978-3-030-85175-0_9)
Jing, R. et al. 2022. Cost-efficient decarbonization of local energy systems by whole-system based design optimization. Applied Energy 326 119921. (10.1016/j.apenergy.2022.119921)
Jing, R. , Zhou, Y. and Wu, J. 2022. Electrification with flexibility towards local energy decarbonization. Advances in Applied Energy 5 100088. (10.1016/j.adapen.2022.100088)
Jing, R. , Zhou, Y. and Wu, J. 2022. Integrated energy system. In: Reference Module in Materials Science and Materials Engineering. Elsevier(10.1016/B978-0-12-821204-2.00138-0)
Justo Reinoso, I. et al., 2022. Use of 3D mini-vascular networks to protect and deliver bacterial spores in self-healing concretes. Presented at: 8th International Conference on Self-Healing Materials Milan, Spain 20-22 June 2022.
Kalhor, S. 2022. Unobtrusive monitoring system for adherence to glaucoma eye-drop treatment. PhD Thesis , Cardiff University.
Kamarudin, M. S. et al., 2022. Impulse breakdown characteristics of CF3I–CO2 at various gas pressure and CF3I content. Presented at: 7th International Conference on the Applications of Science and Mathematics 22 - 24 August 2022. Published in: Mustapha, A. B. et al., Proceedings of the 7th International Conference on the Applications of Science and Mathematics 2021. Vol. 273.Springer Proceedings in Physics Springer; 1999. , pp.405-413. (10.1007/978-981-16-8903-1_35)
Kamel, S. et al., 2022. An efficient electric charged particles optimization algorithm for numerical optimization and optimal estimation of photovoltaic models. Mathematics 10 (6) 913. (10.3390/math10060913)
Kanellopoulos, A. et al., 2022. Self-adaptive construction materials: future directions. In: Kanellopoulos, A. and Norambuena-Contreras, J. eds. Self-Healing Construction Materials: Fundamentals, Monitoring and Large Scale Applications. Engineering Materials and Processes Switzerland: Springer International Publishing. , pp.215-226. (10.1007/978-3-030-86880-2_8)
Kanik, M. E. et al. 2022. Full scope 3D analysis of a VVER-1000 containment pressurization during a LB-LOCA by employing AutoCAD and GOTHIC code. Progress in Nuclear Energy 152 104376. (10.1016/j.pnucene.2022.104376)
Kapusta, K. et al., 2022. Experimental simulations of methane-oriented underground coal gasification using hydrogen - The effect of coal rank and gasification pressure on the hydrogasification process. International Journal of Hydrogen Energy (10.1016/j.ijhydene.2022.10.012)
Karthikeyan, B. et al., 2022. A dual input single output non-isolated DC-DC converter for multiple sources electric vehicle applications. Frontiers in Energy Research 10 979539. (10.3389/fenrg.2022.979539)
Karunarathne, E. , Wijethunge, A. and Ekanayake, J. 2022. Enhancing PV hosting capacity using voltage control and employing dynamic line rating. Energies 15 (1) 134. (10.3390/en15010134)
Keenan, B. E. et al. 2022. MRI safety, imaging artefacts, and grid distortion evaluated for FFP3 respiratory masks worn throughout the COVID-19 pandemic. Clinical Radiology 77 (8), pp.e660-e666. (10.1016/j.crad.2022.05.001)
Keenan, B. E. , Evans, S. L. and Oomens, C. 2022. A review of foot finite element modelling for pressure ulcer prevention in bedrest: current perspectives and future recommendations. Journal of Tissue Viability 31 (1), pp.73-83. (10.1016/j.jtv.2021.06.004)
Khanmohammadi, M. and Sayadi Moghadam, S. 2022. Enhancing displacement coefficient method for multi degree of freedom buildings (MDOF) considering nonlinear soil structure interaction. Bulletin of Earthquake Engineering 20 , pp.8217-8252. (10.1007/s10518-022-01513-w)
Khavari, F. , Esmaily, J. and Shafiekhani, M. 2022. Forecasting of energy demand in virtual power plants. In: Zangeneh, A. and Moeini-Aghtaie, M. eds. Scheduling and Operation of Virtual Power Plants: Technical Challenges and Electricity Markets. Elsevier. , pp.343-358. (10.1016/B978-0-32-385267-8.00020-2)
Kherif, O. et al. 2022. Considerations on earthing impedance measurement using low-magnitude variable-frequency currents. Presented at: 36th International Conference on Lightning Protection (ICLP) Cape Town, South Africa 2 - 7 October 2022. 2022 36th International Conference on Lightning Protection (ICLP). IEEE. , pp.378. (10.1109/ICLP56858.2022.9942461)
Kherif, O. et al. 2022. On the behaviour of vertical ground electrodes under high frequency currents. Presented at: 2nd International Conference on Advanced Electrical Engineering Constantine, Algeria 29-31 October 2022. Proceedings of 2nd International Conference on Advanced Electrical Engineering (ICAEE). IEEE. (10.1109/ICAEE53772.2022.9961998)
Kherif, O. et al. 2022. On the optimization of grounding design of rods covered by low resistivity materials. Presented at: 2022 57th International Universities Power Engineering Conference (UPEC) Istanbul, Turkey 30 August -2 September 2022. 2022 57th International Universities Power Engineering Conference (UPEC). IEEE. (10.1109/UPEC55022.2022.9917937)
Kherif, O. et al. 2022. On the impact of soil resistivity measurement and modelling on grounding performance. Presented at: 2022 36th International Conference on Lightning Protection (ICLP) Cape Town, South Africa 2-7 October 2022. 2022 36th International Conference on Lightning Protection (ICLP). IEEE. , pp.379-382. (10.1109/ICLP56858.2022.9942653)
Kherif, O. et al. 2022. On the performance of a 21-level asymmetrical multilevel voltage inverter. Presented at: 2022 2nd International Conference on Advanced Electrical Engineering (ICAEE) Constantine, Algeria 29-31 October 2022. 2022 2nd International Conference on Advanced Electrical Engineering (ICAEE). IEEE. (10.1109/ICAEE53772.2022.9962034)
Khosa, I. et al., 2022. Financial hazard assessment for electricity suppliers due to power outages: the revenue loss perspective. Energies 15 (12) 4327. (10.3390/en15124327)
Khudhair, A. 2022. Knowledge-based automatic OpenBIM data exchanging framework supporting holistic building design. PhD Thesis , Cardiff University.
Khudhair, A. et al. 2022. A theoretical holistic decision-making framework supporting collaborative design based on common data analysis (CDA) method. Journal of Building Engineering 46 103686. (10.1016/j.jobe.2021.103686)
Koch, M. K. et al., 2022. Super-poissonian light statistics from individual silicon vacancy centers coupled to a laser-written diamond waveguide. ACS Photonics 9 (10), pp.3366-3373. (10.1021/acsphotonics.2c00774)
Kopsidas, S. et al., 2022. Lightning strike damage resistance of carbon‐fiber composites with nanocarbon‐modified epoxy matrices. Journal of Applied Polymer Science 139 (46) e53157. (10.1002/app.53157)
Kovaleva, M. et al. 2022. The evaluation of ammonia/hydrogen combustion on the H permeation and embrittlement of nickel-base superalloys. Presented at: American Society of Mechanical Engineers Rotterdam, Netherlands 13 - 17 June 2022. Proceedings of ASME Turbo Expo 2022. ASME. , pp.82239. (10.1115/GT2022-82239)
Kovaleva, M. et al. 2022. Numerical and experimental study of product gas characteristics in premixed ammonia/methane/air laminar flames stabilised in a stagnation flow. Fuel Communications 10 100054. (10.1016/j.jfueco.2022.100054)
Kovaleva, M. , Rieth, M. and Chen, J. 2022. Interpolation error of FGM tabulation in an unnormalised progress variable subspace. Presented at: 39th International Combustion Symposium Vancouver 24-29 July 2022.
Krokos, V. et al. 2022. A 3D Bayesian multiscale graph neural network framework to predict local stress fields in structures with microscale features. Presented at: 18th European Mechanics of Materials Conference Oxford, England 04-06 April 2022.
Krokos, V. et al. 2022. A Bayesian multiscale CNN framework to predict local stress fields in structures with microscale features. Computational Mechanics 69 , pp.733-766. (10.1007/s00466-021-02112-3)
Kul, S. , Anayi, F. and Meydan, T. 2022. Experimental comparison of localised magnetostriction difference under sinusoidal and PWM excitations. Journal of Magnetism and Magnetic Materials 544 168692. (10.1016/j.jmmm.2021.168692)
Kulasegaram, S. and Mimoun, A. 2022. Assessing the effect of coarse aggregate size on self-compacting fibre reinforced concrete mix. International Journal of Civil Infrastructure (IJCI) 5 , pp.78-84. (10.11159/ijci.2022.011)
Kumar, A. , Varghese, A. and Janyani, V. 2022. Fabrication of graphene-ZnO heterostructure-based flexible and thin platform-based UV detector. Journal of Materials Science: Materials in Electronics 33 , pp.3880-3890. (10.1007/s10854-021-07578-8)
Kumar, A. et al., 2022. Recent development and futuristic applications of MEMS based piezoelectric microphones. Sensors and Actuators A: Physical 347 113887. (10.1016/j.sna.2022.113887)
Kumar, M. and Jayaraman, K. 2022. Design of a modified single-stage and multistage emi filter to attenuate common-mode and differential-mode noises in sic inverter. {IEEE} Journal of Emerging and Selected Topics in Power Electronics 10 (4), pp.4290-4302. (10.1109/JESTPE.2021.3133374)
Lakshmi Srinivas, V. et al. 2022. Harmonic voltage control in distributed generation systems using optimal switching vector strategy. IEEE Systems Journal 16 (2), pp.1861-1872. (10.1109/JSYST.2021.3070498)
Lambay, A. et al. 2022. Effects of demographic factors for fatigue detection in manufacturing. Presented at: 14th IFAC Workshop on Intelligent Manufacturing Systems (IMS 2022) Tel-Aviv, Israel 28-30 March 2022. IFAC-PapersOnLine. Vol. 55(2).Elsevier. , pp.528-533. (10.1016/j.ifacol.2022.04.248)
Lamere, M. et al., 2022. Mapping and enhancing sustainability literacy and competencies within an undergraduate engineering curriculum. Presented at: 9th Research in Engineering Education Symposium and 32nd Australasian Association for Engineering Education Conference (REES AAEE 2021) 5-8 December 2021. Proceedings of AAEE 2021. Research In Engineering Education Network. , pp.298-306. (10.52202/066488-0034)
Leech, C. 2022. An experimental study of the hydrodynamic impact of turbine layout and design considerations in tidal range schemes. PhD Thesis , Cardiff University.
Li, C. et al. 2022. Improved grid impedance compensation for phase-locked loop to stabilize the very-weak-grid connection of VSI's. IEEE Transactions on Power Delivery 37 (5), pp.3863-3872. (10.1109/TPWRD.2021.3140024)
Li, C. et al. 2022. Dominant instability mechanism of VSI connecting to a very weak grid. IEEE Transactions on Power Systems 37 (1), pp.828-831. (10.1109/TPWRS.2021.3115968)
Li, C. , Wang, S. and Liang, J. 2022. Tuning method of a grid-following converter for the extremely-weak-grid connection. IEEE Transactions on Power Systems 37 (4), pp.3196-3172. (10.1109/TPWRS.2022.3167899)
Li, D. et al., 2022. On tracking arbitrary crack path with complex variable meshless methods. Computer Methods in Applied Mechanics and Engineering 399 (1) 115402. (10.1016/j.cma.2022.115402)
Li, G. and Liang, J. 2022. Modular multilevel converters: Recent applications [History]. IEEE Electrification Magazine 10 (3), pp.85-92. (10.1109/MELE.2022.3187886)
Li, H. et al. 2022. Development of future compact and eco-friendly HVDC gas insulated systems: test verification of shape-optimized DC spacer models. Energies 15 (22) 8563. (10.3390/en15228563)
Li, H. et al., 2022. Free vibration of FGM Mindlin plates submerged in fluid. Engineering Structures 259 114144. (10.1016/j.engstruct.2022.114144)
Li, J. et al., 2022. Assessment of combined wind and wave energy in the tropical cyclone affected region: An application in China seas. Energy 260 125020. (10.1016/j.energy.2022.125020)
Li, J. , Dimitriou, P. and Barrow, D. 2022. Acoustic levitation of complex emulsions and hierarchical soft matter constructs. Presented at: MicroTAS 2022 Hangzhou, China 23-27 October 2022.
Li, J. et al. 2022. Building programmable multicompartment artificial cells incorporating remotely activated protein channels using microfluidics and acoustic levitation. Nature Communications 13 (1) 4125. (10.1038/s41467-022-31898-w)
Li, K. et al., 2022. Long-term field exposure of structural concretes in marine environment: state-of-the-art review by RILEM TC 289-DCM. Materials and Structures 55 (7) 205. (10.1617/s11527-022-02027-2)
Li, L. et al., 2022. Electric field improvement for high-voltage bushings. Polymers 15 40. (10.3390/polym15010040)
Li, P. et al., 2022. Multi-stage expansion planning of energy storage integrated soft open points considering tie-line reconstruction. Protection and Control of Modern Power Systems 7 45. (10.1186/s41601-022-00268-5)
Li, P. et al., 2022. Quantized event-driven simulation for integrated energy systems with hybrid continuous-discrete dynamics. Applied Energy 307 118268. (10.1016/j.apenergy.2021.118268)
Li, P. et al., 2022. Deep reinforcement learning-based adaptive voltage control of active distribution networks with multi-terminal soft open point. International Journal of Electrical Power & Energy Systems 141 108138. (10.1016/j.ijepes.2022.108138)
Li, P. et al., 2022. A numerical method based on Polonsky-Keer's conjugate gradient iterative scheme for solving axisymmetric contact of layered half-space. Mechanics Research Communications 124 103946. (10.1016/j.mechrescom.2022.103946)
Li, Q. et al., 2022. Physical modelling of energy losses at surcharged three-way junction manholes in drainage system. Water Science and Technology 85 (4), pp.1011-1026. 639. (10.2166/wst.2021.639)
Li, Q. et al., 2022. Hazard and vulnerability in urban inundated underground space: Hydrodynamic analysis of human instability for stairway evacuation. International Journal of Disaster Risk Reduction 70 102754. (10.1016/j.ijdrr.2021.102754)
Li, Y. et al., 2022. Wavelet transform based differential protection for mvdc distribution network. Presented at: 2022 57th International Universities Power Engineering Conference (UPEC) Istanbul, Turkey 30 Aug 22 - 02 Sept 22. 2022 57th International Universities Power Engineering Conference (UPEC). (10.1109/UPEC55022.2022.9917599)
Li, Y. et al. 2022. Knowledge distillation for energy consumption prediction in additive manufacturing. Presented at: 14th IFAC Workshop on Intelligent Manufacturing Systems (IMS 2022) Tel-Aviv, Israel 28-30 March 2022. IFAC-PapersOnLine. Vol. 55(2).Elsevier. , pp.390-395. (10.1016/j.ifacol.2022.04.225)
Li, Y. et al., 2022. Day-ahead risk averse market clearing considering demand response with data-driven load uncertainty representation: A Singapore electricity market study. Energy 254 (Part A) 123923. (10.1016/j.energy.2022.123923)
Li, Z. et al., 2022. A material removal state prediction method based on multi-scale attention mechanism. Presented at: 42nd Computers and Information in Engineering Conference (CIE) St. Louis, USA 14-17 August, 2022. 42nd Computers and Information in Engineering Conference (CIE). Vol. 2.The American Society of Mechanical Engineers. (10.1115/DETC2022-90919)
Lian, H. et al., 2022. Noise pollution reduction through a novel optimization procedure in passive control methods. Computer Modeling in Engineering & Sciences 131 (1), pp.1-18. (10.32604/cmes.2022.019705)
Lian, X. et al., 2022. Identifying risky components of display products for redesign considering user attention and failure causality. Soft Computing (10.1007/s00500-022-07660-1)
Lin, F. et al. 2022. Localisation-safe reinforcement learning for mapless navigation. Presented at: IEEE International Conference on Robotics and Biomimetics (IEEE ROBIO 2022) Jinghong, China 5-9 December 2022. IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE. , pp.1327-1334. (10.1109/ROBIO55434.2022.10011937)
Ling, H. et al., 2022. Motion planning combines human motion prediction for human-robot cooperation. Presented at: 12th International Conference on CYBER Technology in Automation, Control, and Intelligent Systems (CYBER) Baishan, China 27-31 July 2022. 2022 12th International Conference on CYBER Technology in Automation, Control, and Intelligent Systems (CYBER). IEEE. (10.1109/CYBER55403.2022.9907516)
Ling, J. et al., 2022. Data acquisition-interpretation-aggregation for dynamic design of rock tunnel support. Automation in Construction 143 104577. (10.1016/j.autcon.2022.104577)
Liu, C. et al. 2022. Digital twin-enabled collaborative data management for metal additive manufacturing systems. Journal of Manufacturing Systems 62 , pp.857-874. (10.1016/j.jmsy.2020.05.010)
Liu, E. et al., 2022. Research on low carbon emission optimization operation technology of natural gas pipeline under multi-energy structure. Petroleum Science 19 (6), pp.3046-3058. (10.1016/j.petsci.2022.09.025)
Liu, E. et al., 2022. Performance analysis and structure optimization of shale gas desander. Energy Sources Part A: Recovery, Utilization, and Environmental Effects (10.1080/15567036.2022.2040656)
Liu, E. et al., 2022. Research on optimization operation technology of qt oil pipeline based on the heuristic algorithm. Energy Reports 8 , pp.10134-10143. (10.1016/j.egyr.2022.08.010)
Liu, E. et al., 2022. Correlation analysis of pipeline corrosion and liquid accumulation in gas gathering station based on computational fluid dynamics. Journal of Natural Gas Science and Engineering 102 104564. (10.1016/j.jngse.2022.104564)
Liu, E. et al., 2022. Research on abnormal vibration and vibration reduction measures of a natural gas compressor station: a case study of the JYG compressor station. Energy and Fuels 36 (2), pp.897–909. (10.1021/acs.energyfuels.1c03849)
Liu, J. et al., 2022. DLNet: Accurate segmentation of green fruit in obscured environments. Journal of King Saud University - Computer and Information Sciences 34 (9), pp.7259-7270. (10.1016/j.jksuci.2021.09.023)
Liu, K. et al. 2022. Insights into the thermal performance of underground high voltage electricity transmission lines through thermo-hydraulic modelling. Energies 15 (23) 8897. (10.3390/en15238897)
Liu, L. et al., 2022. A simplified three-dimensional numerical simulation approach for surface acoustic wave tweezers. Ultrasonics 125 106797. (10.1016/j.ultras.2022.106797)
Liu, T. et al. 2022. PaintOmics 4: new tools for the integrative analysis of multi-omics datasets supported by multiple pathway databases. Nucleic Acids Research 50 (W1), pp.W551–W559. (10.1093/nar/gkac352)
Liu, W. et al. 2022. Analysis and protection of converter-side AC faults in a cascaded converter-based MVDC link: ANGLE-DC project. IEEE Transactions on Smart Grid 13 (5), pp.4046-4056. (10.1109/TSG.2021.3139142)
Liu, Y. et al., 2022. Artificial Neural Network (ANN) - Bayesian Probability Framework (BPF) based method of dynamic force reconstruction under multi-source uncertainties. Knowledge-Based Systems 237 107796. (10.1016/j.knosys.2021.107796)
Liu, Y. et al., 2022. A distributed dynamic load identification method based on the hierarchical-clustering-oriented radial basis function framework using acceleration signals under convex-fuzzy hybrid uncertainties. Mechanical Systems and Signal Processing 172 108935. (10.1016/j.ymssp.2022.108935)
Liu, Y. , Wang, L. and Li, M. 2022. Kalman filter–random forest-based method of dynamic load identification for structures with interval uncertainties. Structural Control and Health Monitoring 29 (5) e2935. (10.1002/stc.2935)
Liu, Y. , Wang, L. and Liu, D. 2022. Uncertain dynamic topology optimization based on the interval reliability evaluation and equivalent static loads (ESLs) algorithm. Engineering with Computers 38 , pp.5657-5674. (10.1007/s00366-022-01737-z)
Liu, Z. et al., 2022. Distributed state estimation in digital distribution networks based on proximal atomic coordination. IEEE Transactions on Instrumentation and Measurement 71 9005311. (10.1109/TIM.2022.3193422)
Lofty, J. et al. 2022. Microplastics removal from a primary settler tank in a wastewater treatment plant and estimations of contamination onto European agricultural land via sewage sludge recycling. Environmental Pollution 304 119198. (10.1016/j.envpol.2022.119198)
Lofty, J. , Ouro, P. and Wilson, C. 2022. Microplastics in the riverine environment: meta-analysis and quality criteria for developing robust field sampling procedures. Science of the Total Environment 863 160893. (10.1016/j.scitotenv.2022.160893)
Lu, S. et al., 2022. Data-driven aggregate thermal dynamic model for buildings: a regression approach. IEEE Transactions on Smart Grid 13 (1), pp.227-242. (10.1109/TSG.2021.3101357)
Lu, Y. et al., 2022. Designing anisotropic porous bone scaffolds using a self-learning convolutional neural network model. Frontiers in Bioengineering and Biotechnology 10 973275. (10.3389/fbioe.2022.973275)
Lu, Y. et al., 2022. Comparison of the design maps of TPMS based bone scaffolds using a computational modeling framework simultaneously considering various conditions. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 236 (8), pp.1157-1168. (10.1177/09544119221102704)
Lui, X. et al., 2022. Thyristor-pair- and damping-submodule-based protection against valve-side single-phase-to-ground faults in MMC-MTDC systems. IEEE Transactions on Power Delivery 37 (4), pp.3257-3269. (10.1109/TPWRD.2021.3125661)
Lyrio de Oliveira, L. , de Oliveira Ribeiro, C. and Qadrdan, M. 2022. Analysis of electricity supply and demand intra-annual dynamics in Brazil: A multi-period and multi-regional generation expansion planning model. International Journal of Electrical Power & Energy Systems 137 107886. (10.1016/j.ijepes.2021.107886)
Ma, C. et al. 2022. A large compressive recoverable strain induced by heterogeneous microstructure in a Ni50.6Ti49.4 shape memory alloy via laser powder bed fusion and subsequent aging treatment. Journal of Alloys and Compounds 918 165620. (10.1016/j.jallcom.2022.165620)
Ma, S. et al., 2022. Prediction of mechanical properties of 3d printed lattice structures through machine learning. Journal of Computing and Information Science in Engineering 22 (3) 031008. (10.1115/1.4053077)
Ma, S. et al. 2022. Laser powder bed fusion-built Ti6Al4V bone scaffolds composed of sheet and strut-based porous structures: Morphology, mechanical properties, and biocompatibility. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers 1 (4) 100051. (10.1016/j.cjmeam.2022.100051)
Ma, S. et al., 2022. Programmable intrusion detection for distributed energy resources in cyber-physical networked microgrids. Applied Energy 306 (PartB) 118056. (10.1016/j.apenergy.2021.118056)
Ma, Y. and Zhu, H. 2022. Elasto-plastic behaviour of three-dimensional stochastic fibre networks. In: Silberschmidt, V. V. ed. Mechanics of Fibrous Networks. Elsevier. , pp.165-178. (10.1016/B978-0-12-822207-2.00006-4)
Ma, Y. et al., 2022. THMC constitutive model for membrane geomaterials based on mixture coupling theory. International Journal of Engineering Science 171 103605. (10.1016/j.ijengsci.2021.103605)
Maadjoudj, D. et al., 2022. Features characterizing the surface state of HV insulator glass model under desert pollution. IEEE Transactions on Dielectrics and Electrical Insulation 28 (6), pp.1964-1972. (10.1109/TDEI.2021.009739)
MacKinnon, R. J. et al., 2022. Adaptations to practice and resilience in a paediatric major trauma centre during a mass casualty incident. British Journal of Anaesthesia 128 (2), pp.e120-e126. (10.1016/j.bja.2021.07.024)
Maddalena, R. et al. 2022. Applications and life cycle assessment of shape memory polyethylene terephthalate in concrete for crack closure. Polymers 14 (5) 933. (10.3390/polym14050933)
Makrygianni, N. 2022. Evaluation of the performance of the wave boundary layer model with the OpenIFS. PhD Thesis , Cardiff University.
Manjunath, A. D. B. et al., 2022. Investigation into variation of resistivity and permittivity of aqueous solutions and soils with frequency and current density. IEEE Transactions on Electromagnetic Compatibility 64 (2), pp.443-455. (10.1109/TEMC.2021.3127640)
Mansour, S. et al., 2022. Fuzzy logic controller equilibrium base to enhance AGC system performance with renewable energy disturbances. Energies 15 (18) 6709. (10.3390/en15186709)
Markov, P. et al. 2022. Delayed reorganisation of F-actin cytoskeleton and reversible chromatin condensation in scleral fibroblasts under simulated pathological strain. Biochemistry and Biophysics Reports 32 101338.
Martinez Zavala, H. 2022. High peak, perishable energy recovery – foundation phase –. PhD Thesis , Cardiff University.
Mashruk, S. et al. 2022. Evolution of N2O production at lean combustion condition in NH3/H2/air premixed swirling flames. Combustion and Flame 244 112299. (10.1016/j.combustflame.2022.112299)
Mashruk, S. et al. 2022. Effects of stratified H2 injection in premixed ammonia/hydrogen/air swirling flames. Presented at: 1st Symposium on Ammonia Energy 1 - 2 September 2022.
Mashruk, S. et al. 2022. Stability limits of propane/ammonia/hydrogen ternary blends for an industrial scale swirl burner. Presented at: 1st Symposium on Ammonia Energy 1 - 2 September 2022.
Mashruk, S. et al. 2022. Nitrogen oxide emissions analyses in ammonia/hydrogen/air premixed swirling flames. Energy 260 125183. (10.1016/j.energy.2022.125183)
Mashruk, S. et al. 2022. Combustion features of CH4/NH3/H2 ternary blends. International Journal of Hydrogen Energy 47 (70), pp.30315-30327. (10.1016/j.ijhydene.2022.03.254)
Mashruk, S. et al. 2022. Combustion performances of premixed ammonia/hydrogen/air laminar and swirling flames for a wide range of equivalence ratios. International Journal of Hydrogen Energy 47 (97), pp.41170-41182. (10.1016/j.ijhydene.2022.09.165)
Masoero, E. et al. 2022. Topology optimization using the discrete element method. Part 2: Material nonlinearity. Meccanica 57 , pp.1233-1250. (10.1007/s11012-022-01492-x)
Mason, B. et al. 2022. Laser polishing of additively manufactured aluminium surfaces. Presented at: 1st International Conference on Advanced Manufacturing for Air, Space and Land Transportation Virtual 7-10 March 2022.
Mason, B. et al. 2022. Development of a novel laser polishing strategy for additively manufactured AlSi10Mg alloy parts. Presented at: 9th International Conference on Sustainable Design and Manufacturing - SDM 2022 Split, Croatia 16-17 September 2022.
Mason-Jones, A. et al. 2022. An introduction to fluid structural interaction for tidal turbine design and optimization. In: Letcher, T. M. ed. Comprehensive Renewable Energy. 2nd Ed.. Elsevier. , pp.245-257. (10.1016/B978-0-12-819727-1.00097-2)
Masum, S. A. et al. 2022. A numerical modelling study to support design of an in-situ CO2 injection test facility using horizontal injection well in a shallow-depth coal seam. International Journal of Greenhouse Gas Control 119 103725. (10.1016/j.ijggc.2022.103725)
Mavidou, S. , Clark, D. and Haddad, A. 2022. Progress towards atmospheric correction for aerospace electric discharge applications. Presented at: ICOLSE 2022 - International Conference On Lightning and Static Electricity Madrid, Spain 12-15 September 2022. Zenodo: CERN(10.5281/zenodo.7102071)
McCrory, J. P. et al. 2022. Acoustic emission monitoring of metals. In: Grosse, C. U. et al., Acoustic Emission Testing: Basics for Research – Applications in Engineering. Springer. , pp.529-565. (10.1007/978-3-030-67936-1_18)
Menendez, G. et al., 2022. Enabling water-based processing of graphene/alumina composites using an infiltration approach with amphiphilic triblock copolymers. Journal of the European Ceramic Society 42 (14), pp.6574-6582. (10.1016/j.jeurceramsoc.2022.07.009)
Menendez Rodriguez, G. 2022. Novel water-based processing route for producing structured graphene/alumina composites. PhD Thesis , Cardiff University.
Meng, J. et al., 2022. Anisotropic GPMP2: a fast continuous-time Gaussian processes based motion planner for unmanned surface vehicles in environments with ocean currents. IEEE Transactions on Automation Science and Engineering 19 (4), pp.3914-3931. (10.1109/TASE.2021.3139163)
Meng, K. et al., 2022. Ontology-based approach supporting multi-objective holistic decision making for energy pile system. Buildings 12 (2) 236. (10.3390/buildings12020236)
Meng, K. and Su, H. 2022. Analytical model of large-diameter viscoelastic floating pile and application in pile low-strain integrity testing. Soil Dynamics and Earthquake Engineering 158 107296. (10.1016/j.soildyn.2022.107296)
Menon, A. M. et al., 2022. Deep learning-based optimization of piezoelectric vibration energy harvesters. Presented at: AIAA SCITECH 2022 Forum Virtual 03-07 January 2022. IAA SCITECH 2022 Forum. Aerospace Reseach Central. (10.2514/6.2022-2142)
Meulah, B. et al., 2022. Performance evaluation of the Schistoscope 5.0 for (semi-)automated digital detection and quantification of schistosoma haematobium eggs in Urine: A field-based study in Nigeria. American Journal of Tropical Medicine and Hygiene 107 (5), pp.1047–1054. (10.4269/ajtmh.22-0276)
Michelarakis, M. et al. 2022. Triple point surface discharge photography in atmospheric gases using Intensified high-speed camera system. IEEE Transactions on Dielectrics and Electrical Insulation 29 (1), pp.153-161. (10.1109/TDEI.2022.3148481)
Michelarakis, M. 2022. Investigation of surface discharges in insulation gases through synchronisation of improved electrical and fast enhanced-imaging techniques. PhD Thesis , Cardiff University.
Mihai, I. C. , Bains, A. and Grassl, P. 2022. Modelling of cracking mechanisms in cementitious materials: The transition from diffuse microcracking to localized macrocracking. In: Meschke, G. , Pichler, B. and Rots, J. G. eds. Computational Modelling of Concrete and Concrete Structures. Taylor and Francis. , pp.212-217. (10.1201/9781003316404-26)
Mikaeili, E. , Claus, S. and Kerfriden, P. 2022. Concurrent multiscale analysis without meshing: microscale representation with CutFEM and micro/macro model blending. Computer Methods in Applied Mechanics and Engineering 393 114807. (10.1016/j.cma.2022.114807)
Mimoun, A. and Kulasegaram, S. 2022. Developing self-compacting steel fibre reinforced concrete (SCSFRC) mixes based on target plastic viscosity and compressive strength. Presented at: 7th International Conference on Structural Engineering and Concrete Technology (ICSECT 2022) Lisbon, Portugal 10-12 April 2022.
Mimoun, A. and Kulasegaram, S. 2022. Simulation of self-compacting steel fibre reinforced concrete using an enhanced SPH methodology. In: Meschke, G. , Pichler, B. and Rots, J. G. eds. Computational Modelling of Concrete and Concrete Structures. Taylor and Francis. , pp.162-168. (10.1201/9781003316404-20)
Min, G. 2022. New formulation of the theory of thermoelectric generator for operation under constant heat flux. Energy & Environmental Science 15 , pp.356-367. (10.1039/D1EE03114G)
Min, G. 2022. Prospective photovoltaic-thermoelectric hybrid system. ES Materials & Manufacturing 16 , pp.13-18. (10.30919/esmm5e606)
Mohamed, M. et al. 2022. Simulating LQR and PID controllers to stabilise a three-link robotic system. Presented at: 2nd International Conference on Advance Computing and Innovative Technologies in Engineering (ICACITE) 28-29 April 2022. 2022 2nd International Conference on Advance Computing and Innovative Technologies in Engineering (ICACITE). IEEE. (10.1109/ICACITE53722.2022.9823512)
Mohammad, A. et al. 2022. Leachate characteristics: Potential indicators for monitoring various phases of municipal solid waste decomposition in a bioreactor landfill. Journal of Environmental Management 309 114683. (10.1016/j.jenvman.2022.114683)
Mohsin, M. H. et al., 2022. Synthesis of NiO/Si using sol-gel as a photosensor. Silicon 14 , pp.1349-1355. (10.1007/s12633-020-00872-w)
Morales-Fernandez, A. et al., 2022. Dual-band class J power amplifier at 2.45 and 5.8 GHz for UAVs communications. IEEE Access 10 , pp.48673-48680. (10.1109/ACCESS.2022.3172475)
Mounaïm-Rousselle, C. et al., 2022. Ammonia as fuel for transportation to mitigate zero carbon impact. In: Kalghatgi, G. et al., Engines and Fuels for Future Transport. Energy, Environment, and Sustainability Springer. , pp.257-279. (10.1007/978-981-16-8717-4_11)
Moure, M. R. et al., 2022. Evaluation of admittance domain behavioural model complexity requirements for Power Amplifier design. IET Microwaves, Antennas and Propagation 16 (12), pp.780-788. (10.1049/mia2.12285)
Mudaheranwa, E. et al. 2022. Estimation of Rwanda's power system inertia as input for long-term dynamic frequency response regulation planning. Electric Power Systems Research 207 107853. (10.1016/j.epsr.2022.107853)
Mudaheranwa, E. et al. 2022. Dynamic demand control for grid frequency stabilization. Presented at: Dynamic Demand Control for Grid Frequency Stabilization 22-26 August 2022. IEEE Power Engineering Society Conference and Exposition in Africa, PowerAfrica. IEEE. (10.1109/PowerAfrica53997.2022.9905361)
Muftah, M. N. et al., 2022. Modeling and fuzzy FOPID controller tuned by PSO for pneumatic positioning system. Energies 15 (10) 3757. (10.3390/en15103757)
Muftah, M. N. et al., 2022. PSO tuned cascade of fractional order PI - fractional order PD for pneumatic positioning system. Presented at: 3rd International Conference on Control, Instrumentation and Mechatronics Engineering (CIM2022) 02 - 03 March 2022. Published in: Mohamed, Z. and Wahab, N. A. eds. Control, Instrumentation and Mechatronics: Theory and Practice. Vol. 921.Lecture Notes in Electrical Engineering Singapore: Springer Science Business Media. , pp.429-440. (10.1007/978-981-19-3923-5_37)
Muhawenimana, V. et al. 2022. Local scour patterns around a bridge pier with cable-wrapping. Fluids 8 (1) 3. (10.3390/fluids8010003)
Müller, S. et al. 2022. Influence of channel‐spanning engineered logjam structures on channel hydrodynamics. Water Resources Research 58 (12) e2022WR032111. (10.1029/2022wr032111)
Munguia Galeano, F. and Setchi, R. 2022. Context-sensitive personalities and behaviors for robots. Procedia Computer Science 207 , pp.2325-2334. (10.1016/j.procs.2022.09.291)
Murugapandiyan, P. et al., 2022. Investigation of influence of SiN and SiO2 passivation in gate field plate double heterojunction Al0.3Ga0.7N/GaN/Al0.04Ga0.96N high electron mobility transistors. Silicon 14 (4), pp.1421–1429. (10.1007/s12633-020-00899-z)
Musa, G. et al., 2022. Gas turbine compressor washing economics and optimization using genetic algorithm. Journal of Engineering for Gas Turbines and Power 144 (9) 091012. (10.1115/1.4055187)
Musolino, G. , Ahmadian, R. and Xia, J. 2022. Enhancing pedestrian evacuation routes during flood events. Natural Hazards 112 , pp.1941-1965. (10.1007/s11069-022-05251-9)
Naaman, M. et al. 2022. Evaluating the usefulness of audible acoustics as a damage detection method in large composite structures. Presented at: European Workshop on Structural Health Monitoring 2022 Palermo, Italy 4-7 July 2022. Published in: Rizzo, P. and Milazzo, A. eds. Lecture Notes in Civil Engineering. Vol. 270.Cham: Springer. , pp.849–861. (10.1007/978-3-031-07322-9_86)
Naga Sai Kalyan, C. et al., 2022. Seagull optimization algorithm–based fractional-order fuzzy controller for LFC of multi-area diverse source system with realistic constraints. Frontiers in Energy Research 10 921426. (10.3389/fenrg.2022.921426)
Naresh, M. , Sikdar, S. and Pal, J. 2022. A convolutional neural network based framework for health monitoring of a welded joint steel frame structure. Presented at: IMPORTED, MAY BE LINKEDAdvances in Structural Mechanics and Applications. ASMA 2021.. Vol. 26., pp.251-262. (10.1007/978-3-031-05509-6_21)
Nassrullah, S. 2022. Flow behaviour over rough riverbeds. PhD Thesis , Cardiff University.
Neofytou, A. et al. 2022. Level set topology optimization for fluid-structure interactions. Presented at: AIAA SCITECH 2022 Forum Virtual 03-07 January 2022. AIAA SCITECH 2022 Forum. Aerospace Reseach Central. (10.2514/6.2022-2091)
Niland, A. et al. 2022. Experimental investigation of effervescent atomization: Part I. Comparison of flat-end and streamlined aerator body designs. Atomization and Sprays 32 (4), pp.53-75. (10.1615/AtomizSpr.2022039407)
Niland, A. et al. 2022. Experimental investigation of effervescent atomization: Part II. Internal flow and spray characterization with novel DARPA SUBOFF afterbody streamline aerator. Atomization and Sprays 32 (4), pp.25-51. (10.1615/AtomizSpr.2022039408)
Nistane, T. J. , Kumar, M. and Jayaraman, K. 2022. Comparative evaluation of SiC based two-level inverter with passive EMI filter against dual two-level inverter under PWM schemes. Presented at: IEEE International Conference on Power Electronics, Smart Grid, and Renewable Energy (PESGRE) 2022 Trivandrum, India 02-05 January 2022. 2022 IEEE International Conference on Power Electronics, Smart Grid, and Renewable Energy (PESGRE). IEEE(10.1109/pesgre52268.2022.9715750)
Noorikalkhoran, O. et al. 2022. On the employment of a chloride or fluoride salt fuel system in advanced molten salt reactors, part 1: thermophysical properties and core criticality. Energies 15 (23) 8865. (10.3390/en15238865)
O'Kelly, B. C. et al., 2022. Fate and impact of nano/microplastic in the geoenvironment — ecotoxicological perspective. Environmental Geotechnics (10.1680/jenge.22.00053)
Oliyide, R. O. and Cipcigan, L. M. 2022. Dispatch model for analysing the impacts of electric vehicles charging patterns on power system scheduling, grid emissions intensity, and emissions abatement costs. International Multidisciplinary Research Journal 12 , pp.4-13. (10.25081/imrj.2022.v12.7544)
O'Shaughnessy, C. , Masoero, E. and Gosling, P. 2022. Topology optimization using the discrete element method. Part 1: Methodology, validation, and geometric nonlinearity. Meccanica 57 (6), pp.1213-1231. (10.1007/s11012-022-01493-w)
Oubelaid, A. et al., 2022. Secure power management strategy for direct torque controlled fuel cell/ supercapacitor electric vehicles. Frontiers in Energy Research 10 971357. (10.3389/fenrg.2022.971357)
Oyibo, P. et al. 2022. Schistoscope: An automated microscope with artificial intelligence for detection of schistosoma haematobium eggs in resource-limited settings. Micromachines 13 (5) 643. (10.3390/mi13050643)
Padoan, F. et al. 2022. Initiation of electrical discharge at the triple junction of the lightning protection of an aircraft radome. Presented at: International Conference On Lightning and Static Electricity ICOLSE Madrid, Spain 12-15 September 2022.
Pal, J. et al., 2022. A Combined Machine Learning and Model Updating Method for Autonomous Monitoring of Bolted Connections in Steel Frame Structures Using Vibration Data. Applied Sciences 12 (21) 11107. (10.3390/app122111107)
Pan, D. et al., 2022. Novel rotational motion actuated beam-type multistable metastructures. Materials & Design 224 111309. (10.1016/j.matdes.2022.111309)
Panda, S. et al., 2022. An insight into the integration of distributed energy resources and energy storage systems with smart distribution networks using demand-side management. Applied Sciences 12 (17) 8914. (10.3390/app12178914)
Patton, A. M. et al. 2022. Hydro-geomechanical characterisation of a coastal urban aquifer using multiscalar time and frequency domain groundwater-level responses. Hydrogeology Journal 29 , pp.2751-2771. (10.1007/s10040-021-02400-5)
Pekok, M. 2022. Graphene nanoplatelets reinforced AA2024 composite fabricated using laser powder bed fusion. PhD Thesis , Cardiff University.
Pekok, M. A. et al. 2022. Al-Cu-Mg alloy powder reinforced with graphene nanoplatelets: morphology, flowability and discrete element simulation. Journal of Manufacturing and Materials Processing 6 (6) 148. (10.3390/jmmp6060148)
Peng, Y. et al., 2022. Using artificial intelligence technology to fight COVID-19: a review. Artificial Intelligence Review 55 , pp.4941-4977. (10.1007/s10462-021-10106-z)
Peralta, P. et al., 2022. Electromechanical properties identification for groups of piezoelectric energy harvester based on Bayesian inference. Mechanical Systems and Signal Processing 162 108034. (10.1016/j.ymssp.2021.108034)
Perkins, R. A. et al., 2022. Assessment of brain injury biomechanics in soccer heading using finite element analysis. Brain Multiphysics 3 100052. (10.1016/j.brain.2022.100052)
Phanendra Kumar, A. et al., 2022. Multistability of connected variable stiffness laminates. Presented at: ICRACEM 2020 Online 4-6 Sept 2020. Recent Advances in Computational and Experimental Mechanics, Vol—I. Lecture Notes in Mechanical Engineering Singapore: Springer. , pp.51. (10.1007/978-981-16-6738-1_5)
Phillips, R. C. et al., 2022. The devil Is in the tail dependence: an assessment of multivariate copula‐based frameworks and dependence concepts for coastal compound flood dynamics. Earth's Future 10 (9) e2022EF002705. (10.1029/2022ef002705)
Piacibello, A. et al., 2022. A 5-w gan doherty amplifier for ka-band satellite downlink with 4-ghz bandwidth and 17-db npr. IEEE Microwave and Wireless Components Letters 32 (8), pp.964-967. (10.1109/LMWC.2022.3160227)
Piacibello, A. et al., 2022. AM/PM characterization of wideband power amplifiers. Presented at: IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR) Las Vegas, NV, USA 16-19 January 2022. Proceedings of IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications. IEEE. (10.1109/PAWR53092.2022.9719787)
Poole, R. L. et al., 2022. Axonics sacral neuromodulation system for treating refractory overactive bladder: a NICE medical technologies guidance. Applied Health Economics and Health Policy 20 (3), pp.305–313. (10.1007/s40258-021-00701-0)
Prato, A. et al., 2022. Buckling and post-buckling of thin-walled stiffened panels: modelling imperfections and joints. Thin-Walled Structures 172 108938. (10.1016/j.tws.2022.108938)
Promsutipong, K. et al., 2022. Immersive virtual walking system using an avatar robot. Presented at: 2022 International Conference on Robotics and Automation (ICRA) Philadelphia, PA, USA 23-27 May 2022. 2022 International Conference on Robotics and Automation (ICRA). IEEE. , pp.9325-9331. (10.1109/ICRA46639.2022.9811588)
Pu, R. et al., 2022. Autonomous concrete crack semantic segmentation using deep fully convolutional encoder-decoder network in concrete structures inspection. Buildings 12 (11) 2019. (10.3390/buildings12112019)
Purcell, F. A. et al. 2022. Lamb wave mode spectroscopy on complex structures with amplitude-based feature detection. NDT and E International: Independent Nondestructive Testing and Evaluation 130 102649. (10.1016/j.ndteint.2022.102649)
Qi, H. et al., 2022. Interfacial electric field optimization of DC tri-post insulator based on gradient surface conductance regulation. Transactions of China Electrotechnical Society 2022 (7), pp.1856-1865. (10.19595/j.cnki.1000-6753.tces.210505)
Qin, J. et al. 2022. Research and application of machine learning for additive manufacturing. Additive Manufacturing 52 102691. (10.1016/j.addma.2022.102691)
Quaglia, R. and Camarchia, V. 2022. PAWR 2023 [RWW 2023]. IEEE Microwave Magazine 23 (12), pp.30-30. (10.1109/MMM.2022.3203924)
Quaglia, R. et al. 2022. Load-modulated balanced amplifier: from first invention to recent development. IEEE Microwave Magazine 23 (12), pp.60-70. (10.1109/MMM.2022.3203940)
Quaglia, R. et al. 2022. Effect of HEMT output characteristics on the load mismatch resilience in balanced power amplifiers. Presented at: 2022 International Workshop on Integrated Nonlinear Microwave and Millimetre-Wave Circuits (INMMiC) Cardiff, Wales 07-08 April 2022. 2022 International Workshop on Integrated Nonlinear Microwave and Millimetre-Wave Circuits (INMMiC). IEEE. , pp.1-3. (10.1109/INMMiC54248.2022.9762184)
Quaglia, R. et al. 2022. Mitigation of load mismatch effects using an orthogonal load modulated balanced amplifier. IEEE Transactions on Microwave Theory and Techniques 70 (6), pp.3329-3341. (10.1109/TMTT.2022.3167414)
Quaglia, R. et al. 2022. K-band GaAs Doherty power amplifiers for microwave backhaul. Presented at: 2022 International Workshop on Integrated Nonlinear Microwave and Millimetre-Wave Circuits (INMMiC) Cardiff, Wales 07-08 April 2022. 2022 International Workshop on Integrated Nonlinear Microwave and Millimetre-Wave Circuits (INMMiC). IEEE. , pp.1-3. (10.1109/INMMiC54248.2022.9762217)
Quinn, L. et al. 2022. Physical activity and exercise outcomes in Huntington's disease (PACE-HD): results of a 12-month trial-within-cohort feasibility study of a physical activity intervention in people with Huntington's disease. Parkinsonism & Related Disorders 101 , pp.75-89. (10.1016/j.parkreldis.2022.06.013)
Rachmawati, et al., 2022. Electric field grading and discharge inception voltage improvement on HVDC GIS/GIL spacer with permittivity and conductivity graded materials (ε/σ-FGM). IEEE Transactions on Dielectrics and Electrical Insulation 29 (5), pp.1811-1817. (10.1109/TDEI.2022.3194489)
Rajamony, R. et al. 2022. Artificial neural networks-based multi-objective design methodology for wide-bandgap power electronics converters. IEEE Open Journal of Power Electronics 3 , pp.599-610. (10.1109/OJPEL.2022.3204630)
Rajamony, R. et al. 2022. Multi-objective design of single-phase differential buck inverters with active power decoupling. IEEE Open Journal of Power Electronics 3 , pp.105-114. (10.1109/OJPEL.2022.3147769)
Ramírez, L. et al., 2022. A new mean preserving moving least squares method for arbitrary order finite volume schemes. Applied Mathematics and Computation 443 127768. (10.1016/j.amc.2022.127768)
Ramos, H. et al., 2022. Response of gyroid lattice structures to impact loads. International Journal of Impact Engineering 164 104202. (10.1016/j.ijimpeng.2022.104202)
Ranabhat, B. 2022. Parametric optimisation of a vertical axis hydrokinetic turbine with shallow water application. PhD Thesis , Cardiff University.
Ranabhat, B. et al. 2022. Parametric study of a flapping blade hydrokinetic turbine to harness renewable energy for small communities. Presented at: 1st International Conference on Water and Environment for Sustainability, 2022 7 - 9 December 2022. Proceedings of 1st International Conference on Water and Environment for Sustainability (ICWES 2022). University of Nottingham, Malaysia.
Ravankar, A. A. et al., 2022. Simulation-based mobile robot navigation for precision agriculture monitoring application. Presented at: The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec) Japan 01-04 June 2022. Vol. 2022.Vol. 0. , pp.1P1-A08. (10.1299/jsmermd.2022.1P1-A08)
Ravankar, A. A. et al., 2022. Robot path planning in narrow environments using improved roadmap sampling. Presented at: The Proceedings of JSME Annual Conference on Robotics and Mechatronics (Robomec) Japan 01-04 June 2022. Vol. 2022.Vol. 0. JSME. , pp.2P2-M03. (10.1299/jsmermd.2022.2P2-M03)
Rayamane, P. , Ji, Z. and Packianather, M. 2022. Design and development of a robust vision-based tactile sensor. Presented at: 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics Sapporo, Japan 11-15 July 2022. 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). IEEE. (10.1109/AIM52237.2022.9863285)
Rhosslyn, A. 2022. On a finite element based approach to the design and optimisation of elastomeric additively manufactured cellular structures for impact mitigation in helmets. PhD Thesis , Cardiff University.
Roberts, M. et al. 2022. Biostimulation of jarosite and iron oxide-bearing mine waste enhances subsequent metal recovery. [Online].SSRN. (10.2139/ssrn.4229663)Available at: http://dx.doi.org/10.2139/ssrn.4229663.
Robson, S. and Haddad, M. 2022. A chirp spread spectrum modulation scheme for robust power line communication. IEEE Transactions on Power Delivery 37 (6), pp.5299-5309. (10.1109/TPWRD.2022.3175830)
Rojo Zazueta, E. 2022. The characterisation of a drive train test rig to engineer a tidal stream turbine condition-based maintenance strategy. PhD Thesis , Cardiff University.
Rouse, J. P. , Kerfriden, P. and Hamadi, M. 2022. A probabilistic data assimilation framework to reconstruct finite element error fields from sparse error estimates: Application to sub‐modeling. International Journal for Numerical Methods in Engineering 123 (23), pp.5826-5853. (10.1002/nme.7090)
Ryczek, E. et al., 2022. A case study on reviewing specialist services commissioning in Wales: TAVI for Severe Aortic Stenosis. Applied Health Economics and Health Policy 20 (4), pp.487-499. (10.1007/s40258-021-00692-y)
Sadasivam, S. et al. 2022. Kinetics of gas phase CO2 adsorption on bituminous coal from a shallow coal seam. Energy and Fuels 36 (15), pp.8360–8370. (10.1021/acs.energyfuels.2c01426)
Sadasivam, S. et al. 2022. Characterisation of inorganic constitutions of condensate and solid residue generated from small-scale ex situ experiments in the context of underground coal gasification. Environmental Science and Pollution Research 29 , pp.2203-2213. (10.1007/s11356-021-15780-8)
Sadeque, M. G. et al., 2022. Design of wideband continuous class-f power amplifier using low pass matching technique and harmonic tuning network. IEEE Access 10 , pp.92571-92582. (10.1109/ACCESS.2022.3202886)
Saghi, H. et al., 2022. Optimization of a dual-baffled rectangular tank against the sloshing phenomenon. Journal of Marine Science and Application 21 (1), pp.116-127. (10.1007/s11804-022-00257-y)
Saleem, A. , Ambreen, T. and Ugalde Loo, C. 2022. Modeling and performance evaluation of heat pump water heater systems. Presented at: 2022 19th International Conference on Electrical Engineering, Computing Science and Automatic Control (CCE) Mexico City, Mexico 9-11 November 2022. 2022 19th International Conference on Electrical Engineering, Computing Science and Automatic Control (CCE). IEEE. (10.1109/CCE56709.2022.9975949)
Saleem, A. and Kim, M. 2022. Airside thermal performance of louvered fin flat-tube heat exchangers with different redirection louvers. Energies 15 (16) e5904. (10.3390/en15165904)
Saleem, A. , Saeed, M. and Kim, M. 2022. Optimisation of induced steam residual moisture content in a clothing conditioner based on a genetic algorithm. Energies 15 (15) 5696. (10.3390/en15155696)
Salhi, R. et al., 2022. Cap-pin glass insulator simulation and leakage current waveform extraction. Presented at: 2022 2nd International Conference on Advanced Electrical Engineering (ICAEE) Constantine, Algeria 29-31 October 2022. 2022 2nd International Conference on Advanced Electrical Engineering (ICAEE). IEEE. (10.1109/ICAEE53772.2022.9961979)
Salman, S. , De Nardi, C. and Gardner, D. 2022. A study of damage healing cycles in vascular networks containing silicate-based healing agents. Presented at: 8th International Conference on Self-Healing Materials Milan, Spain 20-22 June 2022.
Samad, B. A. et al., 2022. Modelling of LQR and fuzzy-LQR controllers for stabilisation of multi-link robotic system (robogymnast). Presented at: 8th International Conference on Automation, Robotics and Applications (ICARA 2022) Prague, Czech Republic 18-20 February 2022. 2022 8th International Conference on Automation, Robotics and Applications (ICARA). IEEE. , pp.33-38. (10.1109/ICARA55094.2022.9738577)
Samaranayake, L. et al., 2022. Multi-terminal DC grid with wind power injection. Wind 2 (1), pp.17-36. (10.3390/wind2010002)
Santos, A. et al., 2022. Application of advanced (S)TEM methods for the study of nanostructured porous functional surfaces: A few working examples. Materials Characterization 185 111741. (10.1016/j.matchar.2022.111741)
Schneider, J. J. et al., 2022. Paths in a network of polydisperse spherical droplets. Presented at: ALIFE 2022: The 2022 Conference on Artificial Life Online 18-22 July 2022. The 2022 Conference on Artificial Life Proceedings. MIT Press. (10.1162/isal_a_00502)
Schoina, L. et al. 2022. Impact of annealing cycle parameters on Batch Annealing process performance in tinplate manufacturing. Presented at: 13th European Conference on Industrial Furnaces and Boilers (INFUB 2022) Algarve, Portugal 19-22 April 2022.
Seward, W. 2022. Viability and value of behind-the-meter battery storage. PhD Thesis , Cardiff University.
Seward, W. , Qadrdan, M. and Jenkins, N. 2022. Quantifying the value of distributed battery storage to the operation of a low carbon power system. Applied Energy 305 117684. (10.1016/j.apenergy.2021.117684)
Seward, W. , Qadrdan, M. and Jenkins, N. 2022. Revenue stacking for behind the meter battery storage in energy and ancillary services markets. Electric Power Systems Research 211 108292. (10.1016/j.epsr.2022.108292)
Sha, W. et al., 2022. Topology-optimized thermal metamaterials traversing full-parameter anisotropic space. npj Computational Materials 8 (1) 179. (10.1038/s41524-022-00861-0)
Shafiekhani, M. et al. 2022. Optimal bidding strategy of a renewable-based virtual power plant including wind and solar units and dispatchable loads. Energy 239 (PartD) 122379. (10.1016/j.energy.2021.122379)
Shafiekhani, M. and Hashemizadeh, A. 2022. Multi-objective scheduling of a virtual power plant considering emissions. In: Moeini-Aghtaie, M. and Zangeneh, A. eds. Scheduling and Operation of Virtual Power Plants: Technical Challenges and Electricity Markets. Elsevier. , pp.377-397. (10.1016/B978-0-32-385267-8.00022-6)
Shafiekhani, M. , Zangeneh, A. and Khavari, F. 2022. Bidding strategy in the electricity market. In: Zangeneh, A. and Moeini-Aghtaie, M. eds. Scheduling and Operation of Virtual Power Plants: Technical Challenges and Electricity Markets. [Scheduling and Operation of Virtual Power Plants: Technical Challenges and Electricity Markets]. Elsevier. , pp.37-57. (10.1016/B978-0-32-385267-8.00008-1)
Shaher, A. et al. 2022. Technical potential for rooftop solar photovoltaic in commercial and residential areas in Saudi Arabia. Presented at: 57th International Universities Power Engineering Conference (UPEC) Istanbul, Turkey 30 Aug - 2 Sept 2022. Proceedings of 57th International Universities Power Engineering Conference (UPEC). IEEE. (10.1109/UPEC55022.2022.9917795)
Shahsavari, M. et al., 2022. On nanosecond plasma-assisted ammonia combustion: Effects of pulse and mixture properties. Combustion and Flame 245 112368. (10.1016/j.combustflame.2022.112368)
Shariff, N. B. M. , Sonder, H. B. and Cipcigan, L. 2022. Modelling charging profiles of electric vehicles on malaysian distribution networks. Presented at: 2022 IEEE International Conference on Power and Energy (PECon) Langkawi, Malaysia 5-6 December 2022. 2022 IEEE International Conference on Power and Energy (PECon). IEEE. (10.1109/PECon54459.2022.9988776)
Shen, H. , Brousseau, E. and Kulasegaram, S. 2022. Assessment and investigation of SPH modelling for nano-scratching. Presented at: 2022 8th International Conference on Nanomanufacturing & 4th AET Symposium on ACSM and Digital Manufacturing (Nanoman-AETS) 30 August - 01 September 2022. 2022 8th International Conference on Nanomanufacturing & 4th AET Symposium on ACSM and Digital Manufacturing (Nanoman-AETS). IEEE. (10.1109/Nanoman-AETS56035.2022.10119520)
Shen, Y. et al., 2022. Holistic digital-twin-based framework to improve tunnel lighting environment: From methodology to application. Building and Environment 224 109562. (10.1016/j.buildenv.2022.109562)
Shinde, A. B. et al., 2022. Comparative analysis of mechanical properties for mono and poly-crystalline copper under nanoindentation - Insights from molecular dynamics simulations. Materials Chemistry and Physics 277 125559. (10.1016/j.matchemphys.2021.125559)
Shitvov, A. et al., 2022. Broadband coated lens solutions for FIR-mm-wave instruments. Presented at: Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy Xl Montréal, Canada 17-23 July 2022. Proceedings of Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI;. Vol. 12190.Society of Photo-optical Instrumentation Engineers. , pp.19. (10.1117/12.2629968)
Shivashankar, K. and Bakthavatchaalam, V. 2022. Smart municipal governance system using confluence of technologies in a developing country scenario. Presented at: ICEGOV 2021 6-8 October 2021. Proceedings of the 14th International Conference on Theory and Practice of Electronic Governance. ACM. , pp.535-537. (10.1145/3494193.3494277)
Shouran, M. 2022. Load frequency control for multi-area interconnected power system using artificial intelligent controllers. PhD Thesis , Cardiff University.
Shouran, M. and Alsseid, A. 2022. Particle swarm optimization algorithm-tuned fuzzy cascade fractional order PI-Fractional order PD for frequency regulation of dual-area power system. Processes 10 (3) 477. (10.3390/pr10030477)
Shouran, M. and Anayi, F. 2022. TLBO tuned a novel robust fuzzy control structure for LFC of a hybrid power system with photovoltaic source. Presented at: The 1st International Electronic Conference on Processes: Processes System Innovation Virtual 17-31 May 2022. Proceedings of The 1st International Electronic Conference on Processes: Processes System Innovation. MDPI. (10.3390/ECP2022-12684)
Shouran, M. , Anayi, F. and Packianather, M. 2022. Design of sliding mode control optimised by the Bees algorithm for LFC in the Great Britain power system. Materials Today: Proceedings 52 (3), pp.937-945. (10.1016/j.matpr.2021.10.322)
Shouran, M. et al. 2022. Different fuzzy control configurations tuned by the Bees Algorithm for LFC of two-area power system. Energies 15 (2) 657. (10.3390/en15020657)
Siddique, F. et al., 2022. Sustainable chemical processing of flowing wastewater through microwave energy. Chemosphere 287 (1) 132035. (10.1016/j.chemosphere.2021.132035)
Sikdar, S. , Liu, D. and Kundu, A. 2022. Acoustic emission data based deep learning approach for classification and detection of damage-sources in a composite panel. Composites Part B: Engineering 228 109450. (10.1016/j.compositesb.2021.109450)
Sikdar, S. , Mirgal, P. and Banerjee, S. 2022. Low-velocity impact source localization in a composite sandwich structure using a broadband piezoelectric sensor network. Composite Structures 291 115619. (10.1016/j.compstruct.2022.115619)
Singh, S. 2022. Synthesis and thermoelectric properties of Fe-Ti-Al based alloys. PhD Thesis , Cardiff University.
Sivakumar, V. et al., 2022. Dry-air technology for stabilising weak deposits. Geotechnical Engineering (10.1680/jgeen.21.00231)
Sivakumar, V. et al., 2022. Comparative settlement response of soft clays reinforced with granular columns under widespread loads. Ground Improvement (10.1680/jgrim.21.00074)
Slama, M. E. A. et al. 2022. Application of analytical modelling of flashover derived for flat samples to polluted 11kV SiR insulators. IEEE Transactions on Dielectrics and Electrical Insulation 29 (4), pp.1574-1581. (10.1109/TDEI.2022.3175152)
Slama, M. E. A. et al. 2022. Experimental study and modeling of the effect of ESDD/NSDD on AC flashover of SiR outdoor insulators. Energies 15 (10) 3782. (10.3390/en15103782)
Slater, D. 2022. A systems analysis of the UK COVID 19 pandemic response: part 2 - work as imagined vs work as done. Safety Science 146 105526. (10.1016/j.ssci.2021.105526)
Sliwa, R. E. et al., 2022. The latest advances in wireless communication in aviation, wind turbines and bridges. Inventions 7 (1) 18. (10.3390/inventions7010018)
Smith, L. D. et al., 2022. Examining chemical composition of gas turbine-emitted organic aerosol using positive matrix factorisation (PMF). Journal of Aerosol Science 159 105869. (10.1016/j.jaerosci.2021.105869)
Sonder, H. B. , Cipcigan, L. and Ugalde Loo, C. E. 2022. Demand estimation for electric vehicles at rapid charging hubs and peak load reduction using battery energy storage units. Presented at: CIRED Porto Workshop 2022: E-mobility and power distribution systems Hybrid Conference, Porto, Portugal 2-3 June 2022. Proceedings of CIRED Porto Workshop 2022. IET. , pp.399-403. (10.1049/icp.2022.0735)
Sonder, H. B. , Mudaheranwa, E. and Cipcigan, L. 2022. Estimation of cable and transformer loading with electric vehicles and battery energy storage units. Presented at: IEEE 7th International Energy Conference (ENERGYCON) Riga, Latvia 9-12 May 2022. Conference Proceedings IEEE 7th International Energy Conference (ENERGYCON). IEEE. (10.1109/ENERGYCON53164.2022.9830344)
Song, J. et al. 2022. Laser powder bed fusion of high-strength maraging steel with concurrently enhanced strength and ductility after heat treatments. Materials Science and Engineering: A 854 143818. (10.1016/j.msea.2022.143818)
Song, J. et al., 2022. Effect of remelting processes on the microstructure and mechanical behaviours of 18Ni-300 maraging steel manufactured by selective laser melting. Materials Characterization 184 111648. (10.1016/j.matchar.2021.111648)
Srinivas, V. L. and Wu, J. 2022. Topology and parameter identification of distribution network using smart meter and µPMU measurements. IEEE Transactions on Instrumentation and Measurement 71 , pp.1-14. 9004114. (10.1109/TIM.2022.3175043)
Srivastava, P. et al. 2022. Towards passive bioremediation of dye-bearing effluents using hydrous ferric oxide wastes: Mechanisms, products and microbiology. Journal of Environmental Management 317 115332. (10.1016/j.jenvman.2022.115332)
Steer, J. , Greenslade, M. and Marsh, R. 2022. Correction: Steer et al. A Comparison of Laboratory Coal Testing with the Blast Furnace Process and Coal Injection. Metals 2021, 11, 1476. Metals 12 (1) 130. (10.3390/met12010130)
Strutzenberger, G. et al., 2022. Player-surface interactions: perception in elite soccer and rugby players on artificial and natural turf. Sports Biomechanics 21 (9), pp.1021-1031. (10.1080/14763141.2020.1720279)
Su, T. 2022. A BIM and machine learning integration framework for automated property valuation. PhD Thesis , Cardiff University.
Suliman, F. , Anayi, F. and Packianather, M. 2022. Bees-algorithm for parameters identification of PV Models. Presented at: 2nd International Conference on Advance Computing and Innovative Technologies in Engineering (ICACITE) Greater Noida, India 28-29 April 2022. Proceedings of 2nd International Conference on Advance Computing and Innovative Technologies in Engineering. IEEE. , pp.2219-2223. (10.1109/ICACITE53722.2022.9823446)
Sun, B. et al., 2022. A power decoupling control for wind power converter based on series-connected MMC and open-winding PMSG. IEEE Transactions on Industrial Electronics 69 (8), pp.8091-8101. (10.1109/TIE.2021.3099227)
Sun, C. et al., 2022. Acoustically accelerated neural differentiation of human embryonic stem cells. Acta Biomaterialia 151 , pp.333-345. (10.1016/j.actbio.2022.07.041)
Sun, F. et al., 2022. DSM pricing method based on A3C and LSTM under cloud-edge environment. Applied Energy 315 118853. (10.1016/j.apenergy.2022.118853)
Sun, M. et al., 2022. Bfp net: balanced feature pyramid network for small apple detection in complex orchard environment. Plant Phenomics 2022 9892464. (10.34133/2022/9892464)
Surakasi, B. et al., 2022. A novel methodology to enhance the smooth running of the pm bldc motor drive using pwm-pwm logic and advance angle method. Machines 11 (1) 41. (10.3390/machines11010041)
Sushant, et al., 2022. Emerging eHealth IoT applications: a review on kiosk-based systems. In: Reinvention of Health Applications with IoT. CRC Press(10.1201/9781003166511-11)
Swetapadma, A. et al., 2022. A novel primary and backup relaying scheme considering internal and external faults in HVDC transmission lines. Frontiers in Energy Research 10 1003169. (10.3389/fenrg.2022.1003169)
Syryanyy, Y. et al., 2022. Polarized dependence of soft X-ray absorption near edge structure of ZnO films implanted by Yb. Materials Science in Semiconductor Processing 144 106609. (10.1016/j.mssp.2022.106609)
Tafrishi, S. A. et al. 2022. Discretization and stabilization of energy-based controller for period switching control and flexible scheduling. Presented at: 2022 American Control Conference (ACC) Atlanta, USA 08-10 June 2022. 2022 American Control Conference (ACC). IEEE. , pp.844-849. (10.23919/ACC53348.2022.9867252)
Tafrishi, S. A. et al. 2022. A novel assistive controller based on differential geometry for users of the differential-drive wheeled mobile robots. Presented at: 2022 International Conference on Robotics and Automation (ICRA) Philadelphia, PA, USA 23-27 May 2022. 2022 International Conference on Robotics and Automation (ICRA). IEEE. (10.1109/ICRA46639.2022.9811593)
Tafrishi, S. A. et al. 2022. A geometric assistive controller for the users of wheeled mobile robots without desired states. Presented at: 2021 IEEE International Conference on Robotics and Biomimetics (ROBIO) Sanya, China 27-31 December 2021. 2021 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE. , pp.1953-1959.
Tan, X. et al., 2022. Design and research of intelligent QA system for flight crew operating manual. Presented at: International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC-CIE 2022) St. Louis, MO, USA 14-17 August 2022. 42nd Computers and Information in Engineering Conference (CIE). Vol. 2.The American Society of Mechanical Engineers. (10.1115/DETC2022-90768)
Tang, M. et al., 2022. Regional-based strategies for municipality carbon mitigation: a case study of Chongqing in China. Energy Reports 8 , pp.4672-4694. (10.1016/j.egyr.2022.03.135)
Tao, Q. , He, Z. and Li, H. 2022. Simulation and factor analysis for post-earthquake recovery of densely populated urban residential communities in China. Structure and Infrastructure Engineering (10.1080/15732479.2023.2165116)
Tao, Z. et al., 2022. The modified method of reanalysis wind data in estuarine areas. Water 14 (11) 1826. (10.3390/w14111826)
Taylor, P. C. et al., 2022. An interdisciplinary research perspective on the future of multi-vector energy networks. International Journal of Electrical Power & Energy Systems 135 107492. (10.1016/j.ijepes.2021.107492)
Taylor, R. L. et al. 2022. The influence of solvent composition on the coordination environment of the Co/Mn/Br based para-xylene oxidation catalyst as revealed by EPR and ESEEM spectroscopy. Catalysis Science & Technology 12 , pp.5274-5280. (10.1039/D2CY00496H)
Terayama, J. et al., 2022. Development of non-wearable walking assist robot for preventing falling accident. Presented at: The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec) Japan 01-04 June 2022. Vol. 2022.Vol. 0. JSME. , pp.2A2-C06. (10.1299/jsmermd.2022.2A2-C06)
Tezer, M. M. et al., 2022. Non-axenic biomasses as bacterial self-healing agents in cementitious mortar. Presented at: 8th International Conference on Self-Healing Materials Milan, Spain 20-22 June 2022.
Thangabalan, B. et al., 2022. Understanding the surface condition of silicone rubber nanocomposite due to corona ageing using afm imaging and libs spectroscopy. IEEE Transactions on Dielectrics and Electrical Insulation 29 (6), pp.2089-2100. (10.1109/TDEI.2022.3214478)
Thentral, T. M. T. et al., 2022. An energy efficient modified passive power filter for power quality enhancement in electric drives. Frontiers in Energy Research 10 989857. (10.3389/fenrg.2022.989857)
Theophanous, S. et al., 2022. Development and validation of prognostic models for anal cancer outcomes using distributed learning: protocol for the international multi-centre atomCAT2 study. Diagnostic and Prognostic Research 6 (1) 14. (10.1186/s41512-022-00128-8)
Thornhill, I. et al., 2022. Blue-space availability, environmental quality and amenity use across contrasting socioeconomic contexts. Applied Geography 144 102716. (10.1016/j.apgeog.2022.102716)
Tong, T. , Setchi, R. and Hicks, Y. 2022. Context change and triggers for human intention recognition. Procedia Computer Science 207 , pp.3826-3835. (10.1016/j.procs.2022.09.444)
Tong, Y. et al. 2022. Understanding context of use from online customer reviews using BERT. Presented at: IEEE 18th International Conference on Automation Science and Engineering (CASE 2022) Mexico City, Mexico 20-24 August 2022. 2022 IEEE 18th International Conference on Automation Science and Engineering (CASE). IEEE(10.1109/CASE49997.2022.9926649)
Tong, Y. et al. 2022. A data-driven approach for integrating hedonic quality and pragmatic quality in user experience modelling. Journal of Computing and Information Science in Engineering 22 (6) 061002. (10.1115/1.4054155)
Townsend, W. E. and Reid, A. J. 2022. A 3D fault location program for use in high-voltage substations using multilateration, geolocation and machine learning. Presented at: 17th International Conference on Probabilistic Methods Applied to Power Systems (PMAPS) Manchester, UK 12-15 June 2022. Proceeding of International Conference on Probabilistic Methods Applied to Power Systems (PMAPS). IEEE. (10.1109/PMAPS53380.2022.9810631)
Udoakah, Y. et al. 2022. Volt-VAr optimization of a low voltage. Presented at: 2022 IEEE PES/IAS PowerAfrica 22-26 August 2022. 2022 IEEE PES/IAS PowerAfrica. IEEE. (10.1109/PowerAfrica53997.2022.9905368)
Udoakah, Y. , Sonder, H. B. and Cipcigan, L. 2022. Nigerian distribution network feeder impact assessment with integration of electric vehicles. Presented at: IEEE 7th International Energy Conference (ENERGYCON) Riga, Latvia 9-12 May 2022. Conference Proceedings IEEE 7th International Energy Conference (ENERGYCON). IEEE. (10.1109/ENERGYCON53164.2022.9830280)
Udoakah, Y. et al. 2022. Development of a viable black start restoration pathway and problem formulation sequence. Presented at: IEEE 7th International Energy Conference (ENERGYCON) Riga, Latvia 9-12 May 2022. Conference Proceedings IEEE 7th International Energy Conference (ENERGYCON). IEEE. (10.1109/ENERGYCON53164.2022.9830473)
Ugalde Loo, C. 2022. Are we prepared to cool down in a warming world?. Oxford Energy Forum 134 , pp.47-50.
Valera Medina, A. et al., 2022. Ammonia. In: O'Connor, J. , Noble, B. and Lieuwen, T. eds. Renewable Fuels: Sources, Conversion, and Utilization. Cambridge University Press. , pp.245-274. (10.1017/9781009072366.011)
Varghese, A. et al. 2022. GaN-HEMT on Si as a robust visible-blind UV detector with high responsivity. IEEE Sensors Journal 22 (12), pp.12307-12313. (10.1109/JSEN.2022.3170653)
Vedantham, L. S. , Singh, B. and Mishra, S. 2022. Enhanced power quality PV-inverter with leakage current suppression for three-phase SECS. IEEE Transactions on Industrial Electronics 69 (6), pp.5756-5767. (10.1109/TIE.2021.3090698)
Vedantham, L. S. , Zhou, Y. and Wu, J. 2022. Information and communications technology (ICT) infrastructure supporting smart local energy systems: A review. IET Energy Systems Integration 4 (4), pp.460-472. (10.1049/esi2.12063)
Veeramani, S. and Muthuswamy, S. 2022. Reinforcement learning based path planning of multiple agents of SwarmItFIX robot for fixturing operation in sheetmetal milling process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (10.1177/09544054221080031)
Veeramani, S. and Muthuswamy, S. 2022. Hybrid type multi-robot path planning of a serial manipulator and SwarmItFIX robots in sheet metal milling process. Complex and Intelligent Systems 8 , pp.2937-2954. (10.1007/s40747-021-00499-3)
Veeramani, S. , Muthuswamy, S. and Setchi, R. 2022. Coordination and path planning of a heterogeneous multi-robot system for sheet metal drilling. Procedia Computer Science 207 , pp.2335-2344. (10.1016/j.procs.2022.09.292)
Vishnoi, N. et al., 2022. Flow dynamics in a triple swirl burner. Presented at: National Aerospace Propulsion Conference Online 2020. Published in: Sivaramakrishna, G. , Kumar, S. K. and Raghunandan, B. N. eds. Proceedings of the National Aerospace Propulsion Conference. Lecture Notes in Mechanical Engineering Singapore: , pp.583–599. (10.1007/978-981-19-2378-4_34)
Vishnoi, N. et al., 2022. Effect of Swirler configurations on combustion of humidified lean premixed methane-hydrogen mixtures. Presented at: 2023 AIAA SciTech 23 - 27 January 2023. (10.2514/6.2023-1060.vid)
Vishnuram, P. et al., 2022. A comprehensive review on various non-isolated power converter topologies for a light-emitting diode driver. Frontiers in Energy Research 10 1055258. (10.3389/fenrg.2022.1055258)
Wallace, R. , Rezgui, Y. and Ghoroghi, A. 2022. Designing out the risk of infections via aerosols by updating restrictions on indoor environments depending on local incidence rates and the dominant SARS-Co V -2 strain. Presented at: 2022 IEEE 28th International Conference on Engineering, Technology and Innovation (ICE/ITMC) & 31st International Association For Management of Technology (IAMOT) Joint Conference Nancy, France 19-23 June 2022. Proceedings of 28th International Conference on Engineering, Technology and Innovation (ICE/ITMC) & 31st International Association For Management of Technology (IAMOT) Joint Conference. IEEE. , pp.1-9. (10.1109/ICE/ITMC-IAMOT55089.2022.10033279)
Wan, Y. et al. 2022. Exploiting knowledge graph for multi-faceted conceptual modelling using GCN. Presented at: 3rd International Conference on Industry 4.0 and Smart Manufacturing (ISM 2021) Linz, Austria 17-19 November 2021. Vol. 200.Procedia Computer Science, Vol 200. , pp.1174-1183. (10.1016/j.procs.2022.01.317)
Wang, D. et al., 2022. Planning, operation, and trading mechanisms of transactive energy systems in the context of carbon neutrality [Editorial]. Energy Conversion and Economics 3 (3), pp.109-111. (10.1049/enc2.12060)
Wang, H. et al., 2022. Multiple adaptive model predictive controllers for frequency regulation in wind farms. IEEE Transactions on Energy Conversion , pp.1-12. (10.1109/TEC.2022.3210176)
Wang, H. 2022. Theoretical and experimental investigations in acoustofluidic manipulation of bioparticles. PhD Thesis , Cardiff University.
Wang, J. , Zhang, D. and Zhou, Y. 2022. Ensemble deep learning for automated classification of power quality disturbances signals. Electric Power Systems Research 213 108695. (10.1016/j.epsr.2022.108695)
Wang, J. et al., 2022. Impact of SF6 decomposition products on epoxy resin chemical stability and doping nano-Al2O3-based enhancement using ReaxFF-MD method. CSEE Journal of Power and Energy Systems 9 (2), pp.779-789. (10.17775/CSEEJPES.2021.03120)
Wang, J. et al., 2022. ReaxFF MD investigation on the damage mechanism of epoxy polymer exposed to DC corona discharge in SF6 gas. Presented at: International Conference on Advanced Electrical Equipment and Reliable Operation (AEERO) Beijing, China 15-17 Oct 2021. Proceedings International Conference on Advanced Electrical Equipment and Reliable Operation (AEERO). IEEE. (10.1109/AEERO52475.2021.9708353)
Wang, L. , Ji, Z. and Setchi, R. 2022. Collaboration of KUKA robots on adjusting assembly of motion mechanism. Presented at: Eighth Asia International Symposium on Mechatronics (AISM 2021) 16-19 December 2021. Published in: Duan, B. , Umeda, K. and Kim, C. eds. Proceedings of the Eighth Asia International Symposium on Mechatronics. Vol. 885.Lecture Notes in Electrical Engineering (10.1007/978-981-19-1309-9_100)
Wang, L. and Liu, J. 2022. Dynamic uncertainty quantification and risk prediction based on the grey mathematics and outcrossing theory. Applied Sciences 12 (11) 5389. (10.3390/app12115389)
Wang, L. , Liu, Y. and Li, M. 2022. Time-dependent reliability-based optimization for structural-topological configuration design under convex-bounded uncertain modeling. Reliability Engineering and System Safety 221 108361. (10.1016/j.ress.2022.108361)
Wang, L. et al., 2022. Convexity-oriented reliability-based topology optimization (CRBTO) in the time domain using the equivalent static loads method. Aerospace Science and Technology 123 107490. (10.1016/j.ast.2022.107490)
Wang, L. et al., 2022. Evidence theory-based reliability optimization for cross-scale topological structures with global stress, local displacement, and micro-manufacturing constraints. Structural and Multidisciplinary Optimization 65 (1) 23. (10.1007/s00158-021-03112-w)
Wang, L. , Zhou, Z. and Liu, J. 2022. Interval-based optimal trajectory tracking control method for manipulators with clearance considering time-dependent reliability constraints. Aerospace Science and Technology 128 107745. (10.1016/j.ast.2022.107745)
Wang, L. et al., 2022. Modelling the thermal-hydro-mechanical behaviour of unsaturated soils with a high degree of saturation using extended precise integration method. Canadian Geotechnical Journal (10.1139/cgj-2021-0201)
Wang, S. et al. 2022. A low-loss integrated circuit breaker for HVDC applications. IEEE Transactions on Power Delivery 37 (1), pp.472-485. (10.1109/TPWRD.2021.3063515)
Wang, S. et al., 2022. Adaptive genetic algorithm based on fuzzy reasoning for the multilevel capacitated lot-sizing problem with energy consumption in synchronizer production. Sustainability 14 (9) 5072. (10.3390/su14095072)
Wang, X. , Setchi, R. and Mohammed, A. 2022. Modelling uncertainties in human-robot industrial collaborations. Procedia Computer Science 207 , pp.3652-3661. (10.1016/j.procs.2022.09.425)
Wang, Y. et al., 2022. A single-input extended multilevel inverter based on switched-capacitor with reduced number of devices. International Journal of Electrical Power & Energy Systems 138 107872. (10.1016/j.ijepes.2021.107872)
Wang, Y. et al., 2022. A generalized switched-capacitor step-up multi-level inverter employing single DC source. Journal of Power and Energy Systems 8 (2), pp.439-451. (10.17775/CSEEJPES.2020.06280)
Wang, Y. et al., 2022. Robust dynamic state estimation for power system based on adaptive cubature Kalman filter with generalized correntropy loss. IEEE Transactions on Instrumentation and Measurement 71 , pp.1-11. (10.1109/TIM.2022.3175025)
Wang, Y. et al., 2022. Novel extensible multilevel inverter based on switched-capacitor structure. Journal of power electronics 22 , pp.1448-1460. (10.1007/s43236-022-00450-w)
Wang, Y. et al., 2022. Extendable space-type switched-capacitor multilevel inverter with fault-tolerant capability. Journal of Power Electronics 22 , pp.923-934. (10.1007/s43236-022-00436-8)
Wang, Y. et al., 2022. Adaptive mesh refinement for finite element analysis of the free vibration disturbance of cylindrical shells due to circumferential micro-crack damage. Engineering Computations 39 (9), pp.3271-3295. (10.1108/EC-09-2021-0555)
Wang, Y. , Melikhov, Y. and Meydan, T. 2022. Dipole modelling of temperature-dependent magnetic flux leakage. NDT and E International: Independent Nondestructive Testing and Evaluation 133 102749. (10.1016/j.ndteint.2022.102749)
Wang, Z. , Zhang, Y. and Kennedy, D. 2022. Equivalent linearization method improved by higher order statistics in modal space for geometrically nonlinear vibrations. Computers and Structures 265 106788. (10.1016/j.compstruc.2022.106788)
Wei, C. et al., 2022. Learning manipulation skills with demonstrations for the swing process control of dredgers. Ocean Engineering 246 110545. (10.1016/j.oceaneng.2022.110545)
Wei, H. et al. 2022. Modelling and experimental validation of an EV torque distribution strategy towards active safety and energy efficiency. Energy 239 (Part A) 121953. (10.1016/j.energy.2021.121953)
Wei, H. et al. 2022. Deep reinforcement learning based direct torque control strategy for distributed drive electric vehicles considering active safety and energy saving performance. Energy 238 (Part B) 121725. (10.1016/j.energy.2021.121725)
Wei, H. et al. 2022. Planning integrated energy systems coupling V2G as a flexible storage. Energy 239 (B) 122215. (10.1016/j.energy.2021.122215)
Wei, J. et al., 2022. Turn-on switching analysis of sic/si hybrid switch. Lecture Notes in Electrical Engineering 899 , pp.47-55. (10.1007/978-981-19-1922-0_5)
Wei, L. 2022. Operation and protection of VSC-HVDC grids. PhD Thesis , Cardiff University.
Whatling, G. M. et al. 2022. Assessing functional recovery following total knee replacement surgery using objective classification of level gait data and patient-reported outcome measures. Clinical Biomechanics 95 105625. (10.1016/j.clinbiomech.2022.105625)
Wilkins, A. , Rigopoulos, G. and Masoero, E. 2022. Coarse graining in time with the functional renormalization group: Relaxation in Brownian motion. Physical Review E 106 (5) 054109. (10.1103/PhysRevE.106.054109)
Wu, B. et al., 2022. Conceptual design of intelligent manufacturing equipment based on a multi-source heterogeneous requirement mapping method. Presented at: 14th IFAC Workshop on Intelligent Manufacturing Systems (IMS 2022) Tel-Aviv, Israel 28-30 March 2022. IFAC-PapersOnLine. Vol. 55(2).Elsevier. , pp.475-480. (10.1016/j.ifacol.2022.04.239)
Wu, E. et al., 2022. Optimizing EV cluster contribution for vehicle-to-grid(V2G) frequency regulation. Presented at: 57th International Universities Power Engineering Conference (UPEC)MPORTED, MAY BE LINKED 30 August - 02 September 2022. Proceedings 57th International Universities Power Engineering Conference (UPEC) 2022. IEEE. (10.1109/UPEC55022.2022.9917791)
Wu, T. et al. 2022. Microstructurally related model for predicting behavior of unsaturated soils with double porosity in triaxial space. International Journal of Geomechanics 22 (12)(10.1061/(ASCE)GM.1943-5622.0002569)
Wu, T. et al. 2022. Microstructurally related model for predicting behaviour of unsaturated soils with double porosity in triaxial space. International Journal of Geomechanics 22 (12)
Wu, X. et al., 2022. Vibrational power flow analysis of Timoshenko microbeams with a crack. Composite Structures 289 115483. (10.1016/j.compstruct.2022.115483)
Wu, Z. and Li, H. 2022. Novel one-layer-cable-net antenna with high surface accuracy. Journal of Spacecraft and Rockets 59 (4)(10.2514/1.A35225)
Wu, Z. et al., 2022. Tunable electromagnetically induced transparent window of terahertz metamaterials and Its sensing performance. Applied Sciences 12 (14) 7057. (10.3390/app12147057)
Xia, J. et al., 2022. A unified formula for discharge capacity of street inlets for urban flood management. Journal of Hydrology 609 127667. (10.1016/j.jhydrol.2022.127667)
Xiao, H. et al., 2022. Effects of carbon dioxide on combustion of methane/hydrogen in a swirl combustor. Presented at: 14th International Conference on Applied Energy 8 - 11 August 2022.
Xie, H. et al., 2022. A two-dimensional semi-analytical model for tracer gas injection and transport in a landfill system. Computers and Geotechnics 151 104995. (10.1016/j.compgeo.2022.104995)
Xie, Z. 2022. An implicit Cartesian cut-cell method for incompressible viscous flows with complex geometries. Computer Methods in Applied Mechanics and Engineering 399 115449. (10.1016/j.cma.2022.115449)
Xie, Z. et al. 2022. Large-eddy simulation of turbulent free surface flow over a gravel bed. Journal of Hydraulic Research 60 (2), pp.205-219. (10.1080/00221686.2021.1908437)
Xie, Z. and Lin, P. 2022. Eulerian and Lagrangian transport by shallow-water breaking waves. Physics of Fluids 34 (3) 032116. (10.1063/5.0086434)
Xie, Z. , Lin, P. and Stoesser, T. 2022. A conservative and consistent implicit Cartesian cut-cell method for moving geometries with reduced spurious pressure oscillations. Journal of Computational Physics 459 111124. (10.1016/j.jcp.2022.111124)
Xu, J. et al., 2022. Optimal second-harmonic current injection for capacitor voltage fluctuation reduction in hybrid MMCs under grid-side SLG faults. IEEE Transactions on Power Delivery 37 (4), pp.2857-2866. (10.1109/TPWRD.2021.3118690)
Xu, M. et al., 2022. On-line recognition of abnormal patterns in bivariate autocorrelated process using random forest. Computers, Materials & Continua 73 (1), pp.1707-1722. (10.32604/cmc.2022.027708)
Xu, Z. et al., 2022. A capacitor-based DC circuit breaker for HVDC power grid. Frontiers in Energy Research 10 1013696. (10.3389/fenrg.2022.1013696)
Yahiaoui, F. et al., 2022. Experimental validation and intelligent control of a stand-alone solar energy conversion system using dSPACE platform. Frontiers in Energy Research 10 971384. (10.3389/fenrg.2022.971384)
Yan, J. et al., 2022. Real-time topology optimization based on convolutional neural network by using retrain skill. Presented at: UK Association for Computational Mechanics 2022 Conference Nottingham, England 21-22 April 2022.
Yan, J. et al., 2022. Deep learning driven real time topology optimisation based on initial stress learning. Advanced Engineering Informatics 51 101472. (10.1016/j.aei.2021.101472)
Yan, M. et al., 2022. Projection method for blockchain-enabled non-iterative decentralized management in integrated natural gas-electric systems and its application in digital twin modelling. Applied Energy 311 118645. (10.1016/j.apenergy.2022.118645)
Yan, W. et al., 2022. An energy data-driven approach for operating status recognition of machine tools based on deep learning. Sensors 22 (17) 6628. (10.3390/s22176628)
Yan, W. et al., 2022. A service-oriented energy assessment system based on BPMN and machine learning. Autonomous Intelligent Systems 2 (1) 18. (10.1007/s43684-022-00036-0)
Yan, Z. et al., 2022. A new method of predicting the energy consumption of additive manufacturing considering the component working state. Sustainability 14 (7) 3757. (10.3390/su14073757)
Yang, F. et al., 2022. Study of drain injected breakdown mechanisms in AlGaN/GaN-on-SiC HEMTs. IEEE Transactions on Electron Devices 69 (2), pp.525-530. (10.1109/TED.2021.3138841)
Yang, G. et al. 2022. A review of ant nests and their implications for architecture. Buildings 12 (12) 2225. (10.3390/buildings12122225)
Yang, G. et al., 2022. Static Analysis of Underground Ant Nest Structures. Applied Sciences 12 (23) 12201. (10.3390/app122312201)
Yang, G. et al. 2022. Ventilation simulation in an underground ant nest structure of Camponotus japonicus Mayr. Sustainability 14 16026. (10.3390/su142316026)
Yang, J. et al. 2022. Review of human-machine interaction towards industry 5.0: human-centric smart manufacturing. Presented at: International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC-CIE 2022) St. Louis, MO, USA 14-17 August 2022. 42nd Computers and Information in Engineering Conference (CIE). Vol. 2.The American Society of Mechanical Engineers. (10.1115/DETC2022-89711)
Yang, L. et al., 2022. Capturing secchi disk depth by using sentinel-2 msi imagery in Jiaozhou Bay, China from 2017 to 2021. Marine Pollution Bulletin 185 (A) 114304. (10.1016/j.marpolbul.2022.114304)
Yang, P. 2022. Accurate characterisation and modelling of SiC MOSFETs for transient simulation. PhD Thesis , Cardiff University.
Yang, P. et al. 2022. Hybrid data-driven modelling methodology for fast and accurate transient simulation of SiC MOSFETs. IEEE Transactions on Power Electronics 37 (1), pp.440-451. (10.1109/TPEL.2021.3101713)
Yang, P. et al. 2022. SiC-based improved neutral legs with reduced capacitors for three-phase four-wire EV chargers. IEEE Transactions on Transportation Electrification 8 (2), pp.2565-2582. (10.1109/TTE.2021.3138333)
Yang, R. et al., 2022. Internal energy based grid-forming control for MMC-HVDC systems with wind farm integration. Presented at: 12th International Energy Conversion Congress and Exposition (ECCE Asia 2021) Virtual 24-27 May 2021. IEEE 12th Energy Conversion Congress & Exposition - Asia (ECCE-Asia). IEEE. (10.1109/ECCE-Asia49820.2021.9479038)
Yang, X. et al. 2022. Abstract demonstrations and adaptive exploration for efficient and stable multi-step sparse reward reinforcement learning. Presented at: 27th IEEE International Conference on Automation and Computing (ICAC2022) Bristol, United Kingdom 1-3 September 2022. 2022 27th International Conference on Automation and Computing (ICAC). IEEE. (10.1109/ICAC55051.2022.9911100)
Yang, X. et al. 2022. Hierarchical reinforcement learning with universal policies for multi-step robotic manipulation. IEEE Transactions on Neural Networks and Learning Systems 33 (9), pp.4727-4741. (10.1109/TNNLS.2021.3059912)
Yao, S. et al., 2022. Dynamic energy flow analysis of the heat-electricity integrated energy systems with a novel decomposition-iteration algorithm. Applied Energy 322 119492. (10.1016/j.apenergy.2022.119492)
Yao, Y. et al. 2022. Comparative study on distributed generation trading mechanisms in the UK and China. Energy Conversion and Economics (10.1049/enc2.12056)
Yin, Y. et al., 2022. Fabrication of semi-polar (11-22) GaN V-groove MOSFET using wet etching trench opening technique. IEEE Electron Device Letters 43 (10), pp.1641-1644. (10.1109/LED.2022.3203633)
Yokoi, K. 2022. Third-order less oscillatory and less diffusive compact stencil based upwind schemes, and their applications to incompressible flows and free surface flows. Physics of Fluids 34 (11) 112104. (10.1063/5.0112953)
You, Y. et al. 2022. Advances of digital twins for predictive maintenance. Presented at: 3rd International Conference on Industry 4.0 and Smart Manufacturing (ISM 2021) Linz, Austria 17-19 November 2021. Vol. 200.Procedia Computer Science, Vol 200: , pp.1471-1480. (10.1016/j.procs.2022.01.348)
You, Y. et al. 2022. From human-human collaboration to human-robot collaboration: automated generation of assembly task knowledge model. Presented at: 27th IEEE International Conference on Automation and Computing (ICAC2022) Bristol, UK 1-3 Sept 2022. 2022 27th International Conference on Automation and Computing (ICAC). IEEE. (10.1109/ICAC55051.2022.9911131)
Yu, P. , Bordas, S. P. A. and Kerfriden, P. 2022. Adaptive Isogeometric analysis for transient dynamics: Space-time refinement based on hierarchical a-posteriori error estimations. Computer Methods in Applied Mechanics and Engineering 394 114774. (10.1016/j.cma.2022.114774)
Yu, S. et al., 2022. Heterogeneous microstructure and mechanical behaviour of Al-8.3Fe-1.3V-1.8Si alloy produced by laser powder bed fusion. Virtual and Physical Prototyping 18 (1) e2155197. (10.1080/17452759.2022.2155197)
Yu, Z. et al., 2022. Multi-indicators decision for product design solutions: a TOPSIS-MOGA integrated model. Processes 10 (2) 303. (10.3390/pr10020303)
Yue, S. et al. 2022. Measurement and analysis of the non-symmetry of transverse magnetisation and resulting loss in grain-oriented steel using a modified RSST. Journal of Magnetism and Magnetic Materials 561 169671. (10.1016/j.jmmm.2022.169671)
Yunus, S. , Ming, W. and Ugalde Loo, C. E. 2022. Adaptive variable switching frequency control for SiC-based PMSM drive systems. Presented at: 48th Annual Conference of the IEEE Industrial Electronics Society Brussels, Belgium 17-20 October 2022. Proceedings of IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society. IEEE. (10.1109/IECON49645.2022.9969050)
Zagorscak, R. et al. 2022. Risk assessment methodology for Underground Coal Gasification technology. Journal of Cleaner Production 370 133493. (10.1016/j.jclepro.2022.133493)
Zahertar, S. et al., 2022. Flexible platform of acoustofluidics and metamaterials with decoupled resonant frequencies. Sensors 22 (12) 4344. (10.3390/s22124344)
Zaraki, A. et al. 2022. Developing a leader-follower kinematic-based control system for a cable-driven hyper-redundant serial manipulator. Presented at: 2nd IMA Conference on Mathematics of Robotics Manchester, UK 9-11 Sept 2020. IMA Conference on Mathematics of Robotics. Vol. 21.Springer Proceedings in Advanced Robotics Springer. , pp.1-12. (10.1007/978-3-030-91352-6_1)
Zeng, B. et al., 2022. Synthesis of Mg-Al LDH and its calcined form with natural materials for efficient Cr(VI) removal. Journal of Environmental Chemical Engineering 10 (6) 108605. (10.1016/j.jece.2022.108605)
Zhang, C. et al., 2022. Coupling effects of top-end dynamic boundary with a planar trajectory of "8" on three-dimensional VIV characteristics. Marine Structures 86 103304. (10.1016/j.marstruc.2022.103304)
Zhang, C. et al., 2022. An analytical model for diffusion of chemicals under a thermal gradient in finite clayey soil. Computers and Geotechnics 150 104889. (10.1016/j.compgeo.2022.104889)
Zhang, H. et al., 2022. A machine learning-based approach for product maintenance prediction with reliability information conversion. Autonomous Intelligent Systems 2 (1) 15. (10.1007/s43684-022-00033-3)
Zhang, L. et al., 2022. Coordinated optimization of emergency power vehicles and distribution network reconfiguration considering the uncertain restoration capability of e-taxis. IEEE Transactions on Industry Applications 58 (2), pp.2707-2717. (10.1109/TIA.2021.3137132)
Zhang, L. et al., 2022. Voltage control method based on three-phase four-wire sensitivity for hybrid AC/DC low-voltage distribution networks with high-penetration PVs. IET Renewable Power Generation 16 (4), pp.700-712. (10.1049/rpg2.12350)
Zhang, S. et al., 2022. A hybrid modular interline current flow controller for meshed HVDC grids. IEEE Transactions on Industrial Electronics 69 (10), pp.10055-10065.
Zhang, S. et al., 2022. A hybrid modular interline current flow controller for meshed hvdc grids. IEEE Transactions on Industrial Electronics 69 (10), pp.10055-10065. (10.1109/TIE.2021.3139187)
Zhang, T. et al., 2022. Flutter reliability analysis of Xiangshan Harbor Highway Cable-Stayed Bridges in Service. Applied Sciences 12 (16) e8301. (10.3390/app12168301)
Zhang, T. et al. 2022. Dynamic energy flow analysis of integrated gas and electricity systems using the holomorphic embedding method. Applied Energy 309 118345. (10.1016/j.apenergy.2021.118345)
Zhang, T. et al. 2022. Optimal operation of a tidal lagoon as a flexible source of electricity. Presented at: 2022 IEEE Power & Energy Society General Meeting (PESGM) Denver, CO, USA 17-21 July 2022. Proceedings of Power & Energy Society General Meeting (PESGM). IEEE. (10.1109/PESGM48719.2022.9916952)
Zhang, Z. et al. 2022. The near-isotropic elastic properties of interpenetrating composites reinforced by regular fibre-networks. Materials & Design 221 110923. (10.1016/j.matdes.2022.110923)
Zhao, K. et al. 2022. Digital twin-driven estimation of state of charge for Li-ion battery. Presented at: IEEE International Energy Conference (ENERGYCON 2022) Riga, Latvia 09-12 May 2022. Proceedings of 2022 IEEE 7th International Energy Conference (ENERGYCON). IEEE(10.1109/ENERGYCON53164.2022.9830324)
Zhao, P. et al., 2022. Cyber-resilient multi-energy management for complex systems. IEEE Transactions on Industrial Informatics 18 (3), pp.2144-2159. (10.1109/TII.2021.3097760)
Zhao, X. et al. 2022. Coordination method for DC fault current suppression and clearance in DC grids. CSEE Journal of Power and Energy Systems 8 (5), pp.1438-1447. (10.17775/CSEEJPES.2019.03160)
Zhao, Y. et al., 2022. Communication-efficient federated learning for digital twin systems of industrial internet of things. Presented at: 14th IFAC Workshop on Intelligent Manufacturing Systems (IMS 2022) Tel-Aviv, Israel 28-30 March 2022. IFAC-PapersOnLine. Vol. 55(2).Elsevier. , pp.433-438. (10.1016/j.ifacol.2022.04.232)
Zheng, Y. et al., 2022. Prediction of remaining useful life using fused deep learning models - a case study of turbofan engines. Journal of Computing and Information Science in Engineering 22 (5) 054501. (10.1115/1.4054090)
Zhong, C. et al., 2022. A hybrid success history-based adaptive differential evolution and manta ray foraging optimization for multi-objective truss optimization problems. Presented at: 2022 Annual Conference of the UK Association for Computational Mechanics (UKACM) Nottingham, England 20-22 April 2022.
Zhou, M. et al., 2022. Analysis of the anomalous environmental response to the 2022 Tonga volcanic eruption based on GNSS. Remote Sensing 14 (19) 4847. (10.3390/rs14194847)
Zhou, Y. et al., 2022. Monitoring multi-temporal and spatial variations of water transparency in the Jiaozhou Bay using GOCI data. Marine Pollution Bulletin 180 113815. (10.1016/j.marpolbul.2022.113815)
Zhou, Y. 2022. Guest Editorial: local energy markets for local energy systems integration. IET Energy Systems Integration 4 (4), pp.421-422. (10.1049/esi2.12083)
Zhou, Y. et al. 2022. Application of distributed ledger technology in distribution networks. Proceedings of the IEEE 110 (12), pp.1963-1975. (10.1109/JPROC.2022.3181528)
Zhu, X. et al., 2022. Automated qualitative rule extraction based on bidirectional long shortterm memory model. Presented at: 29th EG-ICE International Workshop on Intelligent Computing in Engineering 2022 Aarhus, Denmark 06-08 July 2022.
Zitouni, S. et al. 2022. Lewis number effects on lean premixed combustion characteristics of multi-component fuel blends. Combustion and Flame 238 111932. (10.1016/j.combustflame.2021.111932)
Zurek, S. et al., 2022. Experimental verification of 2.4 kVAr and 12 kVAr prototype variable inductors controlled by virtual air gaps with magnetic orthogonality. IEEE Transactions on Power Delivery 37 (6), pp.4880-4887. (10.1109/TPWRD.2022.3162174)

Cyhoeddiadau 2022

Yr Ysgol Peirianneg

Cysylltwch â ni

Cysylltu â ni

Dyfarniad Athena Swan